Pepperl+Fuchs ENI11HD Manual 

General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most recent version as well as the supplem ...

3 Safety................................................................................... 6 3.1 Used Symbols............................................. ...

develops, produces and distributes electronic sensors and interface modules for the market of automation technology on a worldwide scale. Contact If you have any questions about the device, its functions, or accessories, ...

xxxxxx 2014-07 5 2 Declaration of conformity This product was developed and manufactured under observance of the applicable European standards and guidelines. The product manufacturer, Pepperl+Fuchs GmbH, D-68307 Mannheim, has a certified quality assurance system that conforms to ISO 9001. Note! A Declaration of Conformity c ...

3.2 Intended Use The ENI11HD incremental rotary encoder is used to record rotations though a direct mechanical coupling with a rotating drive shaft. Internally, the rotation is converted into a sequ ...

Responsibility for planning, assembly, commissioning, operation, maintenance, and dismounting lies with the system operator. Installation and commissioning of all devices must be performed by a trained professional only. Protection of operating personnel and the system is not ensured if the produ ...

The ENI11HD incremental rotary encoder records the rotation of a drive shaft and converts this internally into a sequence of pulses. Due to the nature of the code wheel, two pulse sequences that are phase-delayed by 90° are available on signal channels A and B. This e ...

Mounting to the tapered drive shaft is via a central mounting screw that grips the M6 threaded hole on the face side of the drive shaft. ENI11HD rotary encoders are particularly suitable for use in harsh ambient conditions. They have: ■ A high degree of shock and vibration re ...

5.1 Accessories for Mounting, Dismounting and Connection Illustration Model Number Description Support plate, straight, 70 mm Support location 70 mm from center of shaft Item no. 264125 Support plate, straight, 120 mm Support location 120 mm from center of shaft Item no. 2 ...