Industrial Scientific Tango TX1 Reference Manual

File Specifications

Brand: Industrial Scientific
Category: Measuring Instruments
Model: Tango TX1 (Reference Manual), prvZcX0e5TALY
File Type: PDF
File Size: —
Pages: 56 pages

Download PDF

Download Industrial Scientific Tango TX1 Manual (56 pages)

Read Online:

Read the Industrial Scientific Tango TX1 Reference Manual online using the built-in PDF viewer.

Key Pages of Document

Part Number: 17154831

Edition: 3 10 November 2016 参考指南 部品号:17154831 版本:3 2016 年 11 月 10 日 Guide de référence Numéro réf. : 17154831 Édition : 3 10 novembre 2016 Referenzhandbuch Teilenummer: 17154831 Ausgabe: 3 10. November 2016 Guía de referencia Número de referencia: 17154831 Edición:3 10 de noviembre de ...

Industrial Scientific Corporation.

Pittsburgh, PA USA Shanghai, China Arras, France © 2012, 2013, 2015, 2016 Industrial Scientific Corporation All rights reserved. Published 2016 Revision 3 ...

Contents 目录 Table des matières Inhalt Contenido 목차

Section Page English 1 章节 页码 中文 9 Section Page français 17 Abschnitt Seite Deutsch 25 Sección Página Español 33 목차 페이지 한국어 41 ...

Thank-you for choosing the Tango TX1 from Industrial Scientific Corporation

(ISC). Upon receipt, qualified members of the safety administration team should:  Register the unit for warranty.  Read and understand the Product Manual (available online).  Prepare the unit for first use. • Consult the unit's Final Test and Inspection Repo ...

for approximately three seconds to power on the unit. The instrument operator will see several start-up screens

(examples shown below) as the unit completes its start-up diagnostics. If the unit passes all diagnostic tests, the gas-monitoring screen will be activated and the unit will be in operation mode. If any test fails ...

Start-up screens (H2S is shown below.)

Visual test screen Version Calibration date Gas Information screens Calibration gas setpoint Gas alert setpoint (If enabled) Low alarm setpoint High alarm setpoint TWA setpoint STEL setpoint ...

Gas monitoring screen.

No-fault indicator Gas concentration Installed sensor type Unit of measure Power off To power off the unit, press ; hold for the displayed five-second countdown. A unit that is configured for always-on operation may require the entry of a security code to complete the shutdown process. ...

If enabled, these tasks can be completed – by qualified personnel – from operation mode:

 The time-weighted average (TWA), the short-term exposure limit (STEL), and the peak readings can be viewed and cleared. When any summary reading is cleared, its value is reset to zero and its time-related setting is also reset to zero.  The un ...

Different events can produce the same alarm. Events are distinguished from one another through the use

of symbols that appear on the instrument display screen (see the Product Manual for a complete list of symbols and screens). Alarm Level : High The high alarm features the red lights, with steady sound. It is fast-paced. Gas Present (H2S is shown.) ...

⚠️ Download Safety

The Measuring Instruments Reference manual (56 pages) is completely safe to download (last scan date: 03/07/2026).

Related PDF Instructions for Industrial Scientific Tango TX1: