IMER SYNTESI 140 EL Operating & Maintenance

SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL 2 7 11 10 15 9 1 12 13 4 3 5 8 6 2 14 FIG.1 POS. GB 1 Frame 2 Wheel 3 Arm 4 Motor 5 Belt 6 Bowl rotation reduction gear 7 Tank 8 Drive belt guard 9 Arm closure 10 Bowl tipping reduction gear 11 Handwheel 12 Start and stop switch 13 Electrical connection socket 14 Tow bar 15 Tipper stop Special attention must be given to warnings with this symbol: ...

SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL Dear customer, congratulations on your choice of purchase: the IMER CONCRETE MIXER, the result of years of experience, is a very reliable machine equipped with all the latest technical innovations. - WORKING IN SAFETY In order to be able to work in complete safety, the following instruc- tions must be read carefully. This OPERATING AND MAINTENANCE manual must be kept on site by the person responsible for the worksite, e.g. the site foreman, and must always be available for consultation. The manual should be considered as being an integral part of the machi- ne, and must be kept ...

SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL Table 1 - TECHNICAL DATA Model Syntesi 140 Syntesi 160 Syntesi 190 EL Syntesi 250 EL Syntesi 300 EL Syntesi 350 EL Drum capacity 160 l 138 l 190 l 235 l 314 l 345 l Mix capacity (approx.) 115 l 100 l 160 l 190 l 250 l 280 l Effective output (approx.) 70 l 60 l 120 l 140 l 190 l 210 l Drum speed 24 rpm Direction of drum rotation (view from loading mouth) Anti-clock wise Wheel dimensions 200 x 50 mm 295 x 54 mm 370 x 85 mm 385 x 90 mm Motor rating 0.3 kW 1 kW 1.4 kW 1.1 kW 1.4 kW 1.1 kW Voltage 230 V 230 V 380 V 230 V 380 V 230 V 380 V 230 V 380 V Current 2.2 A 5 A 2 A 5 A 2 A 8 ...

SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL - To stop the concrete mixer from working, use solely the spe- ciic switch (ref.12, ig.1). 6. ELECTRICAL SAFETY The IMER concrete mixer is manufactured according to standard EN 60204-1. It is protected against water sprays (IP 55) and is equipped with overload protection and a minimum voltage coil. - If the protection guards are removed during repair opera- tions, they must be correctly replaced when repairs are completed (ref.8 and ref.9 ig.1). The risk of deterioration of the power cable to the electric motor due to twisting is prevented by a stop (ref.15, fig.1) which prev ...

SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL cy is obtained. Emptying must be carried out with the mixing drum working, moving the drum mouth downwards by turning the hand-wheel provided (ref.11, fig.1). If part of the batch is left in the drum for later use, it is necessary to leave the drum turning. In any case, minimise the time the batch stays in the drum after the required consistency has been reached. - Do not introduce parts of body and/or tools inside the mixer drum while it is running. 14. MAINTENANCE - All maintenance operations must be done by experienced personnel, after having shut down the motor, disconnec ...

SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL 15. RESIDUAL RISKS AND SAFETY SIGNS Though the concrete mixer has been manufactured in full compliance with current standards, residual risks exist that cannot be eliminated, which involve the use of suitable individual protective devices. Adequate warning signs fitted on the machine point out both the risks and the behaviour to be followed. NOISE RISK 16. TROUBLESHOOTING - CAUTION!!! All maintenance operations must be performed exclusively with the machine switched off, with the selector set to "0" and the power plug disconnected from the mains. Ear protection must be worn RI ...