LIMIT LIVDK485 Instruction Manual

Refrigerating chamber 009 009 Frequently asked questions 011 Installtion Instruction Placement Start Human-Machine Interface and Button Operation 005 006 Maintenance of refrigerators Cleaning Defrost Stop using 010 010 010 Freezing chamber 009 ...

obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not damage the refrigerant circuit. Do not use electrical appliances i ...

more and the power socket shall not be sharedwith other electrical appliances. The power cord should be firmly contacted with thesocket or else fires might be caused. Please ensurethat the grounding electrode of the power socket is equipped with a reliable grounding line. Do not ...

Authorized demolition or renovation of the refrigerator is not prohibited. It is forbidden to damage the refrigerant lines and the repair and maintenance of the refrigerator must be carried out by professionals. Damaged power cord must be replaced by the manufacturer, its maintenance department or related professional ...

Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents. Do not place flammable items near the refrigerator to avoid fires. This product is household refrigerators and shall be only suitable for the storage of foods. Accordin ...

packaging materials including bottom cushions and foam pads and tapes inside the refrigerator, tear off the protective film on the door and the refrigerator body. The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust ...

Keys A.REF.TEMP B. C. D. Display For the first power-on, the full display lasts 3s while the start-up tone rings; then, the panel displays normally (The setting temperature of refrigerating chamber and freezing chamber is 5℃and -18℃, respectively, upon the first Display of normal running Display a ...

enters the locking state and gives a buzzing sound of locking. Hold the key "LOCK/UNLOCK" for 2s under the locking state, the system enters the unlocking state and gives a buzzing sound of unlocking. The system enters the locking state automatically without any key operat ...

Temperature setting of freezing chamber Press the key FRZ.TEMP to select the freezing temperature area and then press the key FRZ.TEMP to adjust the temperature of freezing chamber; the temperature drops 1℃ for pressing the key FRZ.TEMP once; press the key FRZ.TEMP again after the temperature reaches -24℃, the freezing cham ...