Hughes 9201 Manual 

When using the Bgan for RADIO, before you do anything else, plug the Bgan into an ISDN COOBE which is turned on. Then switch the BGAN on. The top of the unit has only 2 buttons - power and audio. Press the right hand button for 2 seconds, and lay it flat on the ground so it can get a GPS. The BGAN network requires a valid GPS fi ...

the better the signal, the higher the pitch of the buzzer. Adjust the angle and direction of the panel for the best signal. Press the audio button again to turn off the buzzer. If you are just using a Glensound with the BGAN, you can simply register onto the network by p ...

now’ button The terminal will attempt to register with the network. When it is successful it will automatically open a standard connection. This can be turned off if required. Once this has been done, the terminal is ready for use. To Connect to the Internet via Laptop Once ...

Launch Pad functions. The launch bar options include:- Data connections – connecting to Internet to browse Web sites and send and receive emails, and also using advanced applications such as video and FTP. Text message options – sending and receiving text messages. Pho ...

application. TO SHUT DOWN, PRESS AND HOLD THE POWER BUTTON 3 SECONDS. It will take several seconds for all LEDs to go off. If you need to charge the battery or run the terminal off mains, pug into the power adaptor connector into the DC power input jack. ...