Hubbell VSLT-UP Installation Instructions

City of Industry, CA 91745 (626)968-5666 24.86 4.16 8.31 11.16 8.16 1.28 2.07 4.14 (4)O .39" THRU HOLES O 1.75 WIRE WAY 1 1 (BY OTHERS) INCOMING WIRE LEADS MOUNTING HARDWARE (BY OTHERS) MOUNTING SILICONE ALL SURFACES FIXTURE ASSEMBLY MOUNTING PLATE JUNCTION BOX EGRESS LAMP SOCKET EGRESS EGRESS WIRING TO 12 VOLT DC (BEHIND PLATE) WIRE CONNECTIONS (BY OTHERS) TURN OFF POWER. RE-LAMPING: 2. LAMP MOUNTING PLATE FRONT VIEW SET SCREW (4) P/N A84267 1/4-20 UNC X .63 LG INSTALLATION COMPLETE. 4. 3. 1. TURN OFF POWER. BALLAST SERVICING: 2. LAMP SOCKET 1. TURN OFF POWER. INSTALLATION 2. SERVICE BALLAST. 3. 4. 5. 6. SURFACE 3. 4. 5. 1. TURN OFF POWER. 2. 6. 7. 3. 4. EQUIPMENT GROUND. 5. 1. PULL INCOMING WIRE LEADS THROUGH WIREWAY NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION BOX. (MOUNTING HARDWARE BY OTHERS) MAKE WIRE CONNECTIONS FROM INCOMING WIRE LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE, BLACK TO BLACK, GREEN TO GREEN.) NOTE: CONNECT GREEN GROUND LEAD TO MEETS THE MOUNTING SURFACE. THE EGRESS SOCKET MUST BE WIRED TO A SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.) MAKE WIRE CONNECTIONS. RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE PLATE DISCONNECT WIRES. FIXTURE MUST BE SUPPORTED DURING SERVICING. REMOVE (3) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP. RETURN LID AND SCREWS TO ORIGINAL POSITION AND TIGHTEN SCREWS SECURELY. LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY AND LIFT FIXTURE ASSEMBLY AWAY RE-LAMPING EGRESS LAMP INSTALLATION COMPLETE. REMOVE MR-11 LAMP FROM SOCKET AND REPLACE. (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE. SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. FROM MOUNTING PLATE. AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING (3) 8-32 CAPTIVE SCREWS AND SECURE MOUNTING PLATE TO MOUNTING SURFACE. SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND

City of Industry, CA 91745 (626)968-5666 11.16 8.16 1.28 2.07 4.14 4.16 8.31 24.86 O 1.75" WIRE WAY (4) O .39" THRU HOLES 1 FIXTURE SILICONE (3) 8-32 CAPTIVE SCREWS LAMP 3. 1. 2. 1. RE-LAMPING: 2. 4. 3. 4. 5. 6. 5. 1. 2. 6. 7. 3. 4. 5. 1. 2. ALL SURFACES EGRESS WIRING TO 12 VOLT DC (BEHIND PLATE) JUNCTION BOX (BY OTHERS) WIRE CONNECTIONS (BY OTHERS) WIRE LEADS LAMP SOCKET WOUNTING PLATE INCOMING MOUNTING SURFACE MOUNTING HARDWARE (BY OTHERS) 3. 4. 1/4-20 UNC X .63 LG INSTALLATION COMPLETE. TURN OFF POWER. BALLAST SERVICING: TURN OFF POWER. EGRESS LAMP SOCKET EGRESS MOUNTING PLATE FRONT VIEW TURN OFF POWER. RE-LAMPING EGRESS LAMP EQUIPMENT GROUND. TURN OFF POWER. INSTALLATION SERVICE BALLAST. SET SCREW (4) P/N A84267 ASSEMBLY FROM MOUNTING PLATE. SUPPORTED DURING SERVICING. REMOVE (3) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP. RETURN LID AND SCREWS TO ORIGINAL POSITION AND TIGHTEN SCREWS SECURELY. LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY AND LIFT FIXTURE ASSEMBLY AWAY INSTALLATION COMPLETE. REMOVE MR-11 LAMP FROM SOCKET AND REPLACE. SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE. RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. PULL INCOMING WIRE LEADS THROUGH WIREWAY NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION BOX. (MOUNTING HARDWARE BY OTHERS) MAKE WIRE CONNECTIONS FROM INCOMING WIRE LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE, BLACK TO BLACK, GREEN TO GREEN.) NOTE: CONNECT GREEN GROUND LEAD TO SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE MEETS THE MOUNTING SURFACE. THE EGRESS SOCKET MUST BE WIRED TO A SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.) MAKE WIRE CONNECTIONS. RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE PLATE DISCONNECT WIRES. FIXTURE MUST BE AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING AND SECURE MOUNTING PLATE TO MOUNTING SURFACE. 1

City of Industry, CA 91745 (626)968-5666 (BY OTHERS) FIXTURE LAMP SOCKET MOUNTING PLATE MOUNTING SURFACE MOUNTING HARDWARE WIRE CONNECTIONS (BY OTHERS) INCOMING WIRE LEADS SILICONE ALL SURFACES EGRESS WIRING TO 12 VOLT DC (BEHIND PLATE) JUNCTION BOX (BY OTHERS) (4) 8-32 CAPTIVE SCREWS SET SCREW (4) P/N A84267 1/4-20 UNC X .63 LG INSTALLATION COMPLETE. 4. 3. 1. TURN OFF POWER. BALLAST SERVICING: 2. 1. TURN OFF POWER. RE-LAMPING: 2. EGRESS LAMP SOCKET EGRESS LAMP FRONT VIEW 6. 4. 5. 1. TURN OFF POWER. 2. 7. 4. EQUIPMENT GROUND. 5. 1. TURN OFF POWER. INSTALLATION 2. SERVICE BALLAST. 3. 4. 5. 3. ASSEMBLY 3. RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. FROM MOUNTING PLATE. PULL INCOMING WIRE LEADS THROUGH WIREWAY NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION BOX. (MOUNTING HARDWARE BY OTHERS) MAKE WIRE CONNECTIONS FROM INCOMING WIRE LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE, BLACK TO BLACK, GREEN TO GREEN.) NOTE: CONNECT GREEN GROUND LEAD TO MEETS THE MOUNTING SURFACE. THE EGRESS SOCKET MUST BE WIRED TO A SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.) MAKE WIRE CONNECTIONS. RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE SUPPORTED DURING SERVICING. REMOVE (4) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP. RETURN LID AND SCREWS TO ORIGINAL POSITION AND TIGHTEN SCREWS SECURELY. LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING MOUNTING PLATE LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY AND LIFT FIXTURE ASSEMBLY AWAY RE-LAMPING EGRESS LAMP INSTALLATION COMPLETE. REMOVE MR-11 LAMP FROM SOCKET AND REPLACE. (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE. 6. PLATE DISCONNECT WIRES. FIXTURE MUST BE AND SECURE MOUNTING PLATE TO MOUNTING SURFACE. SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE 3.44 5.75 5.75 2.37 4.75 13.37 (4) O .39" THRU HOLES O 1.75" WIRE WAY 2.07 4.12 1 1

City of Industry, CA 91745 (626)968-5666 MOUNTING PLATE MOUNTING SURFACE MOUNTING HARDWARE (BY OTHERS) SILICONE EGRESS ALL SURFACES EGRESS WIRING TO 12 VOLT DC (BEHIND PLATE) JUNCTION BOX (BY OTHERS) WIRE CONNECTIONS (BY OTHERS) INCOMING WIRE LEADS RE-LAMPING: 2. LAMP SOCKET LAMP SOCKET EGRESS LAMP FRONT VIEW SET SCREW (4) P/N A84267 1/4-20 UNC X .63 LG 4. 3. 1. TURN OFF POWER. BALLAST SERVICING: 2. (4) 8-32 CAPTIVE SCREWS 1. TURN OFF POWER. 1. TURN OFF POWER. INSTALLATION 2. SERVICE BALLAST. 3. 4. 5. 6. 4. 5. 1. TURN OFF POWER. 2. 7. 4. EQUIPMENT GROUND. 5. FIXTURE ASSEMBLY 3. 3. BLACK TO BLACK, GREEN TO GREEN.) NOTE: CONNECT GREEN GROUND LEAD TO MEETS THE MOUNTING SURFACE. THE EGRESS SOCKET MUST BE WIRED TO A SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.) MAKE WIRE CONNECTIONS. RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE SUPPORTED DURING SERVICING. REMOVE (4) 8-32 CAPTIVE SCREWS FROM BOTTOM LID. PULL ON LID TO ACCESS LAMP SOCKET, INSTALL LAMP. RETURN LID AND SCREWS TO ORIGINAL POSITION AND TIGHTEN SCREWS SECURELY. INSTALLATION COMPLETE. LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING MOUNTING PLATE LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY AND LIFT FIXTURE ASSEMBLY AWAY RE-LAMPING EGRESS LAMP INSTALLATION COMPLETE. REMOVE MR-11 LAMP FROM SOCKET AND REPLACE. (4) 1/4-20 x 5/8" SET SCREWS. INSTALLATION COMPLETE. SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS. FROM MOUNTING PLATE. PULL INCOMING WIRE LEADS THROUGH WIREWAY NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION BOX. (MOUNTING HARDWARE BY OTHERS) MAKE WIRE CONNECTIONS FROM INCOMING WIRE LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE, 6. PLATE DISCONNECT WIRES. FIXTURE MUST BE AND SECURE MOUNTING PLATE TO MOUNTING SURFACE. SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND 3.44 5.75 5.75 2.07 2.37 4.75 18.37 4.12 O 1.75" WIRE WAY (4) O .39 THRU HOLES 1 1