Janser MASTER MOBIL II User Instructions

Janser GmbH Böblinger Straße 91 71139 Ehningen GERMANY Phone +49 / 7034 / 127-0 Fax +49 / 7034 / 8838 E-mail: [email protected] Internet: www.janser.com MASTER MOBIL II hydraulic USER INSTRUCTIONS # 111 801 000 PROFESSIONAL FLOORING TECHNOLOGY ...

TABLE OF CONTENTS 1.1 Manual 4 1.2 Explanations of symbols and instructions 4 1.3 Intended use 5 1.4 Owner’s ...

1 SAFETY This manual guarantees the safe and efficient use of the machine. This manual is part of the machine and has to always be kept near the machine and be accessible for the operating personnel at all times. The operating personnel have to have carefully read and understood this manual before any work commences. Prerequi ...

1 SAFETY The machine is used for the removal of all sorts of floorcoverings for example UPVC, linoleum, carpets, rubber floors as well as tiles, coatings, adhesives and parquet flooring! The machine is NOT suited as tractor unit or for demolition work. This includes the compliance with the manufacturer´s operating, maintenan ...

QUALIFICATION The different tasks described in this manual request various qualifications from the persons dealing with the machine. WARNING! Danger for persons with insufficient qualifications! Insufficiently qualified persons can not judge the risks when operating the machine and put themselves and others at risk of serious ...

When operating the machine personal protective clothing has to be worn in order to minimize health hazards. The following protective clothing has to be worn by anybody in the operating area. Protective work clothing. Wear appropriate work clothing! Work clothing should fit tightly and loose garments should be avoided since th ...

1 SAFETY The following paragraph explains residual risks which might be present even if the machine is used correctly. To reduce the risk for persons and material damages and to avoid dangerous situations the listed safety information in this paragraph and in the remaining manual has to be adhered to. Improper use WARNING! Da ...

1 SAFETY Sharp edges and sharp corners CAUTION! Danger of injury from sharp edges and sharp corners! Sharp edges and sharp corners can scratch and cut into your skin. Make sure: - Be careful when working near sharp edges and sharp corners. - Wear protective gloves when in doubt. Insertion tools (knifes/blades) CAUTION! Danger ...

Start-up and operation WARNING! Danger of injury through improper start-up and operation Improper start-up and operation can lead to personal injury or material damage. Make sure: – Start-up and operation can only be executed by sufficiently trained personnel, authorized and instructed by the owner of the machine. – Befo ...

ELECTRICAL CONNECTIONS / ELECTRICAL COMPONENTS WARNING! Risk of death due to electric current! Only connect the machine to the electrical values stated on the rating plate. Check before startup. Only connect the machine to an approved power cable and plug. For Europe, approved power cables and plugs must be used. Cable Type ...

2 PRODUCT INFORMATION 2.1 Technical Description 2.2 Technical Specifications SPECIAL FEATURES The powerful motor combined with the revised HYDRAULIC- DIRECT-DRIVE ensures high forces and extremely low noise level. The MASTER-MOBIl II is self-propelled (forward and reverse) with infinitely adjustable speed. Adjustable ...

coverings or for pre-cutting. For the second cut use wider blades Use in eg rubber flooring, sports surfaces, multilayered structures, among others Especially when these coverings have been adhered to very stubborn adhesives, such as epoxy, 2K or contact adhesive. Self-scoring U-blades Standard blades Premium blades Tough, l ...

Heavy duty blades A heavy duty blade that still has a littleflex. Works on VCT, VAT, wood, tile,rubber epoxy, thin-set, elastomeric coatings, scraping thin-set, glued ceramic. Dimensions Thickness Item no. 152 x 76 mm 2,4 mm 111 400 310 203 x 76 mm 2,4 mm 111 400 320 254 x 76 mm ...

2 PRODUCT INFORMATION 2.5 Controls and equipment ON / OFF switch Power connection Cutting head / blade holder easy and quick replacement of the removal tools by the clamping screws Kick plate to support the work process. Handle adjustment Adjust the grip angle in six positions. Hydraulic tank / pressure valve Upper we ...

3 TRANSPORT 3.1 Raising 3.2 Loading/ unloading 3.3 Storage Always remove all counterweights and blades before loading or unloading. Easy to lift if you can not drive the machine or have no ramp available. ATTENTION! machine weight Carrying or lifting the machine always with 2 people Remove the weights -> see 4.3 Adjus ...

Choice of blade The correct blade size and the correct attachment of the blades, according to the respective floor covering or subfloor will provide the best performance of your machine. Die hier beschriebenen Grundsätze dienen dazu optimale Arbeitsergebnisse zu erzielen und dem Benutzer die Ausführung seiner Aufgaben zu e ...

4 SETUP 4.2 Handle angle The guide handle is adjustable in six positions and can be individually adjusted to the desired working position, Pull out the mains plug! Hold both clamping levers Unscrew the left clamping lever and remove the complete handle bolt (A). Attention handle is not fixed !! support with your body ...

1. Insert the plug of the extension cable into the socket on the guide handle of the machine. 2. Insert the plug of the extension cable into the socket/ wall power supply. 3. Turn on the machine GREEN - Start button RED - Stop button 4. You control the machine by operating the lever FORWARD -> Press the control lever forward ...

Ceramic tiles Before removing ceramic tile, tiles will have to be pre-broke with a mallet or large hammer. On small random block styles of tile, pre-breaking may not be necessary. Open an area large enough for machine or blade to fit in, or start from a doorway. Keep work area clean to keep good wheel contact with floor. Use ...