Graco 1093 Setup & Operation

Text of Graco 1093 Setup & Operation

Setup - Operation

1053/1093 Control Box Patented meter and dispense system for precise one-component micro-dispensing. Not for use in explosive atmospheres. Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. CONTROL POWER

Related Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Component Identification . . . . . . . . . . . . . . . . . . . . 6 Control Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Valve . . . . . . . . . . . . . . . . . . . . . . . .

Component manuals in U.S. English.

Part Description 313566 Dispensit 1093 313812 Dispensit 1053-10B 334001 1053 Valve 24V Solenoid Replacement Kit, Instructions 334002 1093 Valve 24V Solenoid Replacement Kit, Instructions

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-

tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this ma

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury. • Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment. • Tighten all fluid connections before operating the e

Power input/fuse holder, 81/0365-3/11, can be set to either 115V or 230V. To determine what voltage it is currently

set to, look at the port and read what is showing through the cover window. To switch voltage, open the fuse holder cover with a small screwdriver, pull the fuse holder o