IKA RC 5 basic Manual 

2 Operator panel and display 3 Handle 4 Venting grid 5 RS 232 port 6 USB port 7 External temperature sensor socket 8 Pump connector IN 9 Pump connector OUT 10 Power switch 11 Power socket 12 Backflow 13 Overflow Device setup Fig. 1 1 2 3 4 3 5 6 4 3 3 8 9 10 11 12 13 7 ...

Declaration of Conformity ........................................................................................................................ 4 Explication of warning symbols .... ...

Indicates an (extremly) hazardous situation, which, if not avoided, will result in death, serious injury. Indicates a hazardous situation, which, if not avoided, can result in death, serious injury. Indicates a potentially hazardous situation, which, if not avoided, can result in injury. Indicates practices which, if not avoi ...

starting up and follow the safety instructions. • Keep the operating instructions in a place where it can be accessed by everyone. • Ensure that only trained staff work with the device. • Follow the safety instructions, guidelines, occupational health, safety and accident prev ...

ing fluids. • Range of use (indoor use only): - Laboratories - Schools - Pharmacies - Universities This instrument is suitable for use in all areas except: - Residential areas - Areas that are connected directly to a low-voltage supply network that also supplies residential ...

- Any damage should be notified immediately to the shipping agent (post office, railway network or logistics company). Preparations • Setting up: - Place the unit on an even, stable, clean, nonslip, dry and fireproof surface. - Keep at least 20 cm of open space on the front and rear side. - ...

- Before filling the fluid into the bath, open the venting grid as indicated in following figure. - Check and make sure that the drain valve is closed (ro- tate clockwise to the stop position, see Fig. 6). Note: Please note information in section “Commissioning”. - Connect the power plug and turn on the devic ...

No. IKA Designation Operating temperature range for open bath application (°C) Operating temperature range for closed bath applications (°C) Safety temperature (°C) Flash point (°C) 0 CF.EG28.N10.80.8 -10 ... 80 -10 … 80 90 115 1 CF.EG39.N20.80.16 -20 … 80 -20 … 80 90 115 2 CF.EG44.N25.80.19 -25 � ...

Empty all fluid in the bath before moving device from one place to other place. The device must be lifted by two persons with the upper handles. It can also be moved on flat surface by lifting and push- ing the front of the device. It is easy to move the device with the help of the wheels. The angle of inclinatio ...