ETI 813-513 Operating Instructions

the electrode. Press ON/OFF to switch the unit on and place the sensor in the solution to be measured (immersion level only). Stir the solution and allow a few seconds for the measurement to stabilise. The instrument will automatically turn off after 10 minutes of inactivity or ...

Worthing · West Sussex · BN14 8HQ 01903 202151 · [email protected] · etiltd.com 813-513/14.11.18 Change battery according to polarity Battery Cap ON-OFF / HOLD button CAL button Immersion level Protective Cap Sensor inside Lift latch here then push cap up to open First close the battery cover as this unit ...