DMP Electronics 734N-WIFI Installation And Programming Manual

Power Supply.................................................1 Zone Terminals..............................................1 Annunciators..................................................1 Indicator LEDs...............................................1 About the 734N-WIFI...........................1 Form C ...

Zone 3 REX Strike Time..........................22 Activate On-board Speaker..................22 Card Options...............................................22 Custom Card Definitions...................24 Wiegand Code Length........................... 24 Site Code Position and Length........... 24 User Code Position ...

1 ANNUNCIATORS An on-board programmable piezo provides local annunciation at the 734N-WIFI. You can also connect a variety of switched ground annunciators to the 734N-WIFI for remote annunciation. INDICATOR LEDS The 734N-WIFI provides three indicator LEDs. The red LED tu ...

FORM C RELAY The 734N-WIFI’s Form C relay draws up to 35mA of current. Refer to the NC/C/ NO (Dry Contact Relay) and the Isolation Relay sections in this document for more information. PROGRAMMING CONNECTION The 734N-WIFI also provides a keypad programming connection ...

3 Piezo RESET PCB FEATURES DOOR RELAY TERMINAL WIEGAND INPUTS ZONES ANNUNCIATOR OUTPUTS PIEZO INDICATOR LEDS DC INPUT SMA CONNECTOR WIFI NETWORK CONNECTOR ...

INSTALL THE 734N-WIFI The 734N-WIFI comes in a high-impact plastic housing that you can mount directly to a wall, backboard, or other flat surface. For easy installation, the back and ends of the 734N-WIFI housing have wire entrances. The back also contains multiple sc ...