Fortin EVO-ONE Regular Installation
Text of Fortin EVO-ONE Regular Installation
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE
STARTED WITH THE HOOD OPEN.
CONTACT
DE CAPOT
SECURITY STICKER
AUTOCOLLANT DE
SÉCURITÉ
MANDATORY INSTALL | INSTALLATION OBLIGATOIRE
Notice: the installation of safety
elements are mandatory. The hood pin
and the sticker are essential security
elements and must be installed.
Notice: l'installation des éléments de
sécurité est oblig
This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DESCRIPTION | DESCRIPTION
At Ignition Switch
Au commutateur d’ignition
At Steering Column
À la colonne de direction
(~) DOORLOCKS
DATA
ECU, Driver’s side
ECU, Côté Conducteur
(-) DRIVER
DOOR PIN
(~) CAN
HIGH
(-)DISARM
(~) CAN LOW
( ) TPMS
IGNITION
(~) IMMO
DATA
OB
Lt.Blue/Black In/Out A10
Black
In A11
Pink
Out A12
Yellow/Black
Out A13
Brown/White
In A14
Pink/Black
In A15
Purple/Yellow In/Out A16
Green/White In/Out A17
Green/Red In/Out A18
White/Black
Out A19
Lt.Blue In/Out A20
C5 Brown
C4 Gray/Black
C3 Gray
C2 Orange/Brown
C1 Orange/Green
D6 White/Red
D5 White/Blue
D4 White/Green
D
Insert the required remaining
connectors.
2
3
4
Insérez les connecteurs requis
restants.
LOCK
ACC ON
PUSH
START
IGN
Turn the Ignition to the
ON/RUN position.
6
Turn the Ignition to the OFF
position.
LOCK
ACC ON
PUSH
START
OFF
Tournez
ignition (ON).
la clé en position
Tournez la clé à OFF.
The RED and BLUE LED’s
will flash rapidly 10x times.
The BLUE LED will flash
rapidly.
Key bypass programmed.
CAN-Bus programmed.
Les DELs BLE
PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION
Release the programming
button when the BLUE LED is
ON.
If the BLUE LED is not ON solid
disconnect the 6-Pin Main
connector and go back to step 1.
Insert the required remaining
connectors.
2
3
4
Turn the Ignition to the
ON/RUN position.
5
Turn the Ignition to the OFF
position.
Press and hold the
programming button:
Insert the 6-Pin Main connector.
The module is now
programmed.
Le module est
programmé.
In
This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
REMOTE STARTER PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION DU DÉMARREUR À DISTANCE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE
MODULE FOR THE REMOTE STARTER PROGRAMMING.
RÉFÉREZ-VOUS AU GUIDE D’INSTALLATION RAPIDE INCLUS
AVEC LE MODULE POUR LA PROGRAMMATION D
Fortin EVO-ONE Service No : 000 102 04 2536
Date: xx-xx
INTERFACE MODULE
Made in Canada
PATENTS PENDING US: 2007-228827-A1
www.fortinbypass.com
HARDWARE VERSION
FIRMWARE VERSION
Module label | Étiquette sur le module
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular
basis. We recommend that you update this module to the latest fi rmware and
download the latest installation guide(s) pr