Axis 5570e Installation Manual
Text of the manual
AXIS 5570e Installation Guide
Take some time to read through the safety notices before installing the AXIS 5570e. Please observe all safety markings and
instructions when using this product.
Warning!
must be observed to avoid bodily injuries.
Caution!
must be observed to avoid loss of data or damage to your equipment.
Important:
must be observed to av
AXIS 5570e Installation Guide
Page 3
ENGLISH
Product Overview
Thank you for purchasing the AXIS 5570e print server. This product has been developed to connect your printers
anywhere in your network, allowing all network users access to the shared printer resources.
The AXIS 5570e is a LAN attached multi-protocol print server that prints IBM and ASCII data st
AXIS 5570e Installation Guide
Hardware Inventory
Unpack and check all the items using the following check list. Contact your dealer if anything is missing or
damaged. All packing materials are recyclable.
Model Summary
The AXIS 5570e is available in two versions; IPDS SNA and TCP/IP. The table below shows the functionality of
each version.
Note:
Item
AXIS 5570e Installation Guide
Page 5
ENGLISH
The AXIS 5570e Network Print Server
Backside label on print server
Printer Ports
AXIS 5570e is equipped with one USB port that is USB 1.1 and 2.0 low and full speed compliant, and one
high-speed IEEE 1284 compatible parallel port.
Test Button
The test button is used to
• print a test page to check the connection
AXIS 5570e Installation Guide
Power Indicator
The power indicator is lit while power is applied. If it is not lit, or if it flashes, there is a problem with the print
server or its power adapter.
Configuration and Management
The print server can be configured and managed from its internal Web pages, using HTTP as well as HTTPS in the
secure mode. The
AXIS 5570e Installation Guide
Page 7
ENGLISH
Installation Overview
To get your print server up and running on your network, follow the instructions below:
• Connect the AXIS 5570e to your network and to your printer as described in
Connecting the Hardware.
• Proceed to Setup and Configuration to determine which setup procedures that are
relevant to your
AXIS 5570e Installation Guide
Setup and Configuration
1.
Start out with setting an IP address on the print server, described in Assign an IP address, on page 9.
2.
Refer to the table below to determine which setup procedures that are relevant to your network environment.
Environment
Data Stream
Network Configuration
Actions
AS/400
SCS / IPDS
SNA
See t
AXIS 5570e Installation Guide
Page 9
ENGLISH
Assign an IP address
You can set the IP address of your print server using one of the following methods, depending on your network
operating environment:
Automatic IP Address Assignment
Manual IP Address Assignment
Method
Server required
Comment
DHCP
DHCP server
Dynamic assignment of IP addresses. See Automatic IP