Brother S-6200A Manual 

扫线装置 DISPOSITIVO LIMPIAHILOS CAUTION /注意/ ATENCION Turn off the power switch and disconnect the power cord before installing any optional parts. The machine may operate if the treadle is depressed by mistake, which could result in injury. 作业前请先关闭电源开关，并将电源插头从插座上拔 下。 当误按动起动开关时，缝纫机动作会导致人员受伤。 Desconectar el interrouptor princi ...

■Vertical position and angle [A] Distance from end of thread wiper (2) to top of needle plate (3) when solenoid plunger (1) is pushed up as far as it will go <-[]03> 6.5 mm, <-[]05> 9.0 mm [B] Front edge of thread wiper (2) at angle of 45° to presser foot (4) 1. Loosen the screw (5), and then adjust the thread wiper (2) by moving it up and down and turning it. 2. Tighten the screw (5). ■Sideways position [C] Front edge of ...