DAEWOO ELECTRONICS DSD-9502T Operation & User’s Manual
Text of the manual
Twin digital terrestrial Receiver &
Hard disc Recorder
DSD-9502T 2006.9.13 2:16 PM ˘
` 1 mac001 1200DPI 90LPI
Thank you for purchasing the Digital PVR.
Equipped with the latest technology and design, the DSD-9502T/9503T is a set-top box
ideal for digital terrestrial broadcast reception. The simple installation and operation, user-
friendly three-dimensional OSD, Digital audio output with Dolby Digital ready, and
advanced video clarity made for TV and
Important care and safety advice
2
This Digital PVR has been manufactured to meet international safety standards, but you
must take care to operate it safely.
It is important that you read these safety instructions.
If you have any doubts about the installation, operation, or safety of this Digital PVR,
contact Daewoo, as shown in the next page.
Electrical w
Important care and safety advice
3
Cleaning
•
Cleaning : always disconnect from the mains supply before cleaning. Wipe with a lint-
free cloth or one that has been slightly dampened with clean water. Never use
detergents, liquid cleaners.
Unplug when not in use
•
When not in use for an extended period, unplug the Digital PVR from the mains outlet.
Do no
When you open the packaging you should find
1) Daewoo Digital PVR
2) Remote Control & Batteries
3) RF-lead
4) User’s Guide & Quick start Guide
•
If any parts are missing, do not attempt to install this product.
Please contact the Daewoo Careline on 0870 100 2525.
Table of Contents
Introduction _________________________________________
1 Power On indicator
2 Remote indicator
3 Hard disk drive indicator
; will be visible when hard disk drive is in use ie when in record or time shift mode.
4 Menu Button
; allows access to on screen menu.
5 OK button
; can be used to select a menu or confirm menu options.
6 Standby Button
; switches between Operation and Standby modes.
7 Menu up
1 RF IN
; connects your aerial.
2
Audio L/R
; connects to your TV or VCR and outputs audio signals.
3
T V Scart
; connects a T V SCART cable.
4
RF OUT
; connects an RF to the RF (ANT) input on your TV or VCR.
5 S/PDIF
; outputs the digital audio signals.
6 VCR/DVD SCART
; connects to your VCR/DVD.
RF IN
RF OUT
L
R
AUDIO
OUT
S/PDIF
OUT
TV
VCR
DVD
Mute ; pauses the audio temporarily.
2
TV/DVR ; switches between DVR and TV.
3
Number buttons
4
EPG ; Electronic Programme Guide
5
Menu ; choose and change a wide range of PVR’s
features. Or exit the menu.
6
Arrow buttons ; allows you to move through
menu’s. Or navigates in playback mode.
7
Record ; initialises the record - see relevant section
in th
Connecting the PVR
SCART connections offer the best picture and sound quality.
They can also tell your TV when the Digital PVR is switched on and off and whether
widescreen pictures are being broadcast. Therefore this is the way this box has been
designed to be connected.
•
Make sure your TV is switched off, together with any other equipment you are
conn
Connecting the PVR
Option 2: connecting to a TV and VCR
•
Connect the SCART cable between the VCR socket on your Digital PVR and your
VCR’s SCART IN socket.
• Connect a SCART cable between the SCART TV socket on your Digital PVR and your
TV SCART IN socket.
• Connect an RF cable between the ‘RF OUT’ socket on the Digital PVR and the RF
input