Cooper Lighting All Pro APX Exits Installation Instructions
Text of the manual
WALL MOUNT INSTALLATION
Step 1.
De-energize the circuit at the junction box (J-box) where the
exit sign is to be installed.
Step 2.
Remove the exit sign stencil from the EXIT frame. Remove
and discard the plastic canopy from inside the EXIT.
Step 3.
Knock out the appropriate mounting pattern and the wire
pass hole in the EXIT backplate to fit the J-box being
CEILING OR END MOUNT INSTALLATION
Step 1.
De-energize the circuit at the junction box (J-box) where the exit sign is to be installed.
Step 2.
Remove the exit sign stencil from the EXIT frame.
Step 3.
Remove the canopy kit from inside the EXIT.
Step 4.
Place the provided screws in the canopy screw holes. Tabs inside the holes will prevent the