Comm-Tec DaisyNET II Operation & User’s Manual

Version: V1.0.1 DaisyNET II SRX User Manual all-guide s.com ...

1. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 6. Clean this apparatus only with dry cloth. 2. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. 3. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (inc ...

Important Safety Instructions ........................................................................... 2 Introduction ...................................................................................................... 2 Overview ................................................................................................... 2 Features ................................................................................................... 3 Package Contents .................................................................................... 4 Specifications ......................................................................... ...

Receiver with HDBaseT in and HDBaseT out, and utilize HDBaseT technology as daisy-chain medium to cascade multiple A/V sources, displays or any device with HDBaseT connection, together in a chain to set up an Inline A/V distribution system. It supports one HDBaseT input and one HDBaseT output for cascading. A local HDMI out which can support up to 4k@60Hz scalar with audio extraction is provided in the rear side to connect local monitor or zone displays. It has a 2-Port Ethernet Switch built-in so that Ethernet could pass through over HDBaseT for LAN control ...

 HDBaseT input and output to cascade multiple A/V sources and displays  HDMI 2.0 and HDCP 2.2 compliant  Support 4K@60Hz 4:2:0 up to 70m over Cat5e/Cat6, or up to 100m over Cat6a/Cat7  Built in CEC controller and RS232 controller for smart control  Automatic CEC and RS232 command to Power ON/Standby Display, by detecting input signal status  Daisy-chain Grouping mode offered to match flexible application  LAN control with user-friendly WEB GUI and Telnet API  Built in 2-Port Ethernet Switch for LAN control or LAN access  Built in USB Charger up t ...

 1 x Power Supply (DC 12V 3A)  1 x AC cable (EU standard)  1 x Phoenix Male Connector (2 Pin 3.5mm)  2 x Phoenix Male Connector (3 Pin 3.5mm)  1 x HDMI Dust Plug  2 x Mounting Brackets all-guide s.com ...

Input Signal Type HDBaseT Input Resolution Supported HDBaseT: VESA: 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x9608, 1280x10248, 1360x7688, 1366x7688, 1400x10508,1440x9008, 1600x9008 , 1600x12008, 1680x10508, 1920x12008 SMPTE:720x480P7,8,720x576P8,1280x720P6,8, 1920x1080I6,8,1920x1080P2,3,5,6,8,3840x2160P 2,3,5,6,8, 4096x2160P2,3,5,6,8 Note1: 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = 60 Hz; Note2: HDMI 1.4 with 4k@50Hz/60Hz( chroma sub-sampling 4:2:0 8-bit only) for HDBaseT input. Output 1 x HDMI OUT, 1x HDBaseT OUT, Output Signal Type ...

1280x8008, 1280x9608, 1280x10248, 1360x7688,1366x7688,1400x10508,1440x9008, 1600x9008 , 1600x12008, 1680x10508, 1920x12008 SMPTE:720x480P7,8,720x576P8,1280x720P6,8, 1920x1080I6,8,1920x1080P2,3,5,6,8,3840x2160P 2,3,5,6,8, 4096x2160P2,3,5,6,8 Note1 :1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = 60 Hz; Note2: HDMI 1.4 with 4k@50Hz/60Hz( chroma sub-sampling 4:2:0 8-bit only) for HDBaseT input. Audio Input HDBT embedding audio Output HDMI audio de-embedded, Stereo Control Control Method Telnet, Web GUI General Operating Temperature 0°C to 45°C (32°F t ...

223mm x 27mm x 196mm / 8.78’’ x 1.06’’ x 7.75’ Product Weight 1.2kg Certification CE, RoHS ...

times when click “LocateME” on WEB 2 Power LED Indicate power status 3 DIP Switch SCALER UPDATE: Switch to this position before updating SCALER. USB CHARGER: Charge USB device 4 USB port Attach the USB flash drive 5 RESET Use a pointed stylus to press this button for five or more seconds to reset the DaisyNET II RX Rear Panel No. Name Description 1 HDBT IN Connects to HDBT output port of any HDBT device or the other DaisyNET II RX. 2 RS232 Connects to a controllable device such as projector for RS232 pass-through 3 Ethernet Connects to a LAN ...

5 SCALER Toggles the switch to manage HDMI output scaler 6 AUDIO OUT Connects to audio system such as an amplifier 7 HDBT OUT Connects to HDBT input port of any HDBT device or the other DaisyNET II RX. 8 Power Connects to power supply with 2-pin phoenix connector 9 Power DC 12V power input all-guide s.com ...

Position Functions 0 Auto Scaler 1 Fix 1024 x 768@60Hz as native video 2 Fix 1280 x 720@60Hz as native video 3 Fix 1280 x 800@60Hz as native video 4 Fix 1280 x 1024@60Hz as native video 5 Fix 1920 x 1080@60Hz as native video 6 Fix 1920 x 1200@60Hz as native video 7 Fix 3840 x 2160@30Hz as native video 8 Fix 3840 x 2160@60Hz as native video 9 Web or API Control ...

cascade connection for multiple DaisyNET II TX and RX, offering scaler HDMI output setting. Connections and Installation 1. Connect the HDBT OUT port of DaisyNET II TX 1 to the HDBT IN port of DaisyNET II TX 2, connect the HDBT OUT port of DaisyNET II TX 2 to the HDBT IN port of DaisyNET II TX 3, connect the HDBT OUT port of DaisyNET II TX 3 to the HDBT IN port of DaisyNET II RX 1, connect the HDBT OUT port of DaisyNET II RX 1 to the HDBT IN port of DaisyNET II RX 2 to finish a Daisy-type connection. 2. Using quality HDMI/DP/VGA cables, conne ...

HDMI OUT of the DaisyNET II RX. 4. Power on all devices. 5. Hold press the ShowME button on the first DaisyNET II TX for 10s to start the Daisy-chain sequence. All DaisyNET devices in the link will obtain a new IP address in sequence. Note: 1. Once all devices are powered on after connection, users must sort the DaisyNET devices firstly according to the above step 5, otherwise it will cause IP conflicts when operates on multiple devices cascaded. 2. Any reset, removed or newly added DaisyNET device in cascaded connection would also cause IP conflicts, please re-sort the Daisy-cha ...

connected display such as a TV or projector. When detecting the HDBT signal change from efficient to null, the shutdown timer of the device is starting. Once time is up, the device will automatically send out CEC shutdown commands to shut the display down. Contrarily, once the HDBT signal change from null to efficient is detected, the device will automatically power on the display immediately. Here takes 3 applications for examples. Example 1 (DaisyNET II TX and RX for Chain-Type connection): If the front DaisyNET II TX with source(s) inserted is in ShowMe activated statu ...

If DaisyNET II TX2 is ShowMe activated, the DaisyNET II RX will not detect any HDBT signal change under this connection. That's to say, the RX will not send Auto CEC command to power off the display, the display will maintain current state. Example 3 (DaisyNET II RX and TX for Ring-Type connection): If the DaisyNET II TX2 is ShowMe activated, the DaisyNET II RX HDBT input is the DaisyNET II TX2 HDBT output. When remove the source(s) from TX2 until no source remains, a shutdown timer will start, and all of the DaisyNET II devices will send Auto CEC commands to power off the displays once th ...

Before access the Web GUI, please sort the devices via ShowMe button of the first DaisyNET II TX firstly. Access the WEB GUI Step 1. Make sure that your computer and the DaisyNET II devices are on the same subnet. The default IP address for the DaisyNET II TX is 192.168.1.121, and for the DaisyNET II RX is 192.168.1.122. Set the computer’s IP address as 192.168.1.X (X is suggested to range from 2 to 253). Connect DaisyNET II to your computer using a Cat cable. Step 2. Input the IP address into a web browser (as seen below). A login screen will appear, enter the default password � ...

the new IP address by using SmartSetGUI tool or pressing the reset button to restore the DaisyNET II to its default settings. Run SmartSetGUI tool to obtain IP address. Click Search, it will display the new IP address. WEB GUI Introduction The WEB GUI contains four sub-menus: Status, Configuration, Advanced and Device List. Status This sub-menu displays the current status of DaisyNET II. ...

Device in green represents DaisyNET II TX and RX are connected in the chain but not working in Show Me mode. Click the device icon, it will display the alias name, IP address, sequence, grouping mode status and input source of the DaisyNET II. Note:  Grouping OFF means the device is not working in grouping mode.  Grouping ON means the device is working in grouping mode. ...