BEHA SKO300T Manual
Text of BEHA SKO300T Manual
SKO 300T Manual
l Thank you for purchasing our shoe dryer.
l Please read this instruction manual carefully and keep it for future
reference.
l READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR
MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY
OBSERVING
ALL
SAFETY
INFORMATION.
FAILURE
TO
COMPLY
WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE!
l IMPORTANT SAFETY INFORMATION
1. Read all instructions caref
SKO 300T Manual
13. This heater is not intended for use in wet or damp locations. Do not use this heater in the
immediate surroundings of a bath, a shower or a swimming pool. Never place a heater
where it may fall into a bathtub or another water container.
14. Do not use the heater outdoors.
15. The heater should not be placed immediately below a socket-outlet.
16. This appliance can be used by children aged from 8 years and above and persons with
reduced
SKO 300T Manual
6) Vent Pipes
OPERATION
l Hang the appliance on the wall before you start using it. Make sure the timer is in the “OFF”
position and plug in the appliance.
l Stick the vent pipes in the wet shoes, and then turn on the 3-hour timer.
SECURITY SYSTEM
l The appliance is equipped with a thermostat that automatically turns it off if it overheats. It
will turn it back on once it has cooled down.
l If this doesn’t work and the appliance stil
SKO 300T Manual
INSTALL THE APPLIANCE ON THE WALL
l Place the paper on the wall in the position you would like to install the appliance. Drill two
holes as marked on the paper (Fig. 1).
NOTE: REMOVE THE PAPER AFTER DRILLING THE HOLES.
l Insert plugs in the holes if needed, and then insert the screws and tighten them (Fig. 2).
l Hang the shoe dryer on the wall onto the screws, and pull it (Fig. 3).
l Move the shoe dryer to the right until it stops, then pu