Beckhoff CX8050 Documentation

CANopen and CAN CX8050: CANopen-Master oder CAN-Master CX8051: CANopen-Slave 1.4 2018-02-09 Version: Date: ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 3 Version: 1.4 Table of contents 1 Notes on the documentation.................................................................................................................... 5 1.1 Explanation of symbols..................................................................................... ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 4 Version: 1.4 7.4.2 Sending any CAN message............................................................................................. 55 7.4.3 CX8050 Master ................................................................................................................ 55 7.4.4 CX8051 ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 5 Version: 1.4 1 Notes on the documentation This description is only intended for the use of trained specialists in control and automation engineering who are familiar with the applicable national standards. It is essential that the documentation and the following notes and explanat ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 6 Version: 1.4 1.1 Explanation of symbols The following symbols with corresponding warnings or explanatory text are used in the documentation. Read and follow the warnings. Symbols that warn of personal injury: DANGER Serious risk of injury Note this warning. Hazard with high risk o ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 7 Version: 1.4 1.2 Documentation issue status Version Comment 0.1 • Preliminary version 1.0 • Foreword updated • Chapter 1-second UPS added • Chapter Operating System added 1.1 • Foreword reworked • Chapter „For your safety“ added • ATEX warnings added 1.2 • Chap ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 8 Version: 1.4 2 For your safety Read the chapter on safety and follow the instructions in order to protect from personal injury and damage to equipment. Limitation of liability All the components are supplied in particular hardware and software configurations appropriate for the application. ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 9 Version: 1.4 2.2 Staff qualification All operations involving Beckhoff software and hardware may only be carried out by qualified personnel with knowledge of control and automation engineering. The qualified personnel must have knowledge of the administration of the Embedded PC and the assoc ...

CX8050, CX8051 - Embedded-PCs for CANopen and CAN 10 Version: 1.4 • The devices contain electronic components, which may be destroyed by electrostatic discharge when touched. Observe the safety precautions against electrostatic discharge according to DIN EN 61340-5-1/-3. Working with networks • Limit physical and electronic access to all ...