Caframo BDC1850 Instruction Manual

Power and Control ENGLISH Instruction Manual pages 5-18 FRANÇAIS Mode d’emploi pages 19-32 ESPANÕL Manual de instrucciones páginas 33-46 DEUTSCH Bedienungsanleitung Seiten 47-60 RoHS WEEE all-guide s.com ...

Georgian Bluffs ON N0H 2T0 Canada Attn: Warranty Validation Department Return Address ___________________________ ___________________________ __________________________ ...

Company Name________________________________________Contact Name_____________________________________________________ Address___________________________City___________________State/Prov______________Country______Zip/Postal Code______________ Telephone_____________________________Fax____________________________E-mail____________________________________________ Name of Dealer that supplied your Caframo Product__________________________Date of Purchase____________________________________ Model #___________________________Serial #______________________________________________________________________________ Please check the co ...

General Instructions............................................................................................................. 7 Stirrer Approvals.................................................................................................................. 7 Packing List......................................................................................................................... 8 Description....................................................................................................... ...

2. The stirrer must be securely fixed to a stable support. Mount to a Caframo Stand (Part Number A110) with a Caframo heavy duty clamp (Part Number A120). If other stands or clamps are used, the unit must be secure and can not fall if tipped up to ten degrees from the vertical. 3. The stirrer must be supplied with the rated voltage. See serial plate. 4. CAUTION: This is not an explosion proof stirrer. Do not use with highly flammable or explosive materials. 5. Spinning paddles or impellers can cause severe personal injuries. Operators must ...

2. Unpack the stirrer carefully. Ensure it is not damaged and verify the contents against the packing list. If the stirrer is damaged or the contents do not correspond with the packing list, notify your supplier immediately. 3. Read the manual carefully! Make sure that all users read this manual thoroughly before operating the stirrer. 4. This instruction manual should always be kept readily available for reference. 5. For further questions or inquiries, please contact: Caframo Limited 501273 Grey Road 1 Georgian Bluff ...

ensure all parts are received with the unit. Do not discard the container and packing materials until all parts are accounted for. It is recommended to keep the original packaging for transportation and storage. Description Order Number Quantity Ultra Torque Stirrer, 115 volt BDC1850 or Universal Stirrer, 115 volt BDC3030 or Ultra Speed Stirrer, 115 volt BDC6015 1 or Ultra Torque Stirrer, 220 volt BDC1850-220 or Universal Stirrer, 220 volt BDC3030-220 or Ultra Speed Stirrer, 220 volt BDC6015-220 Calibration Certificate ...

laboratory and for use in industry to stir numerous liquids with various proper- ties and applications. The BDC series of stirrers are available in six different models. BDC1850 BDC1850-220 rotates at 12 - 1800 rpm with a maximum torque of 568 Ncm (50 in-lbs) BDC3030 BDC3030-220 rotates at 20 - 3000 rpm with a maximum torque of 341 Ncm (30 in-lbs) BDC6015 BDC6015-220 rotates at 40 - 6000 rpm with a maximum torque of 170 Ncm (15 in-lbs) * The “220” models operate on 220-240 volt mains voltage. The BDC stirrers use a digitally controlled high efficiency brush ...

230 volts @ 50/60 Hz Installation Category (in accordance with IEC664) II II Maximum Current Draw 3 Amps 3 Amps Maximum Output Power 1/5 hp, 150 watts Speed Readout LCD 4 digit display Speed Readout Accuracy +/- 1 rpm or +/- 1% of reading Torque Readout Accuracy +/- 12 N-cm (1 in-lb) or +/- 5% of reading Maximum Operating Noise 70 dB(A) at 1 meter Motor Type Brushless DC Drive 2 stage transmission Hollow drive shaft Nitrated P .30 with 10 mm (0.39”) diameter bore for stirring impellers 13 mm (0.51”) outside diameter for drive chuck Chuck Guard Length 67 mm, (2.64”) Diameter 54 mm, (2.13”) Molded of c ...

Stirrer Low Speed High Speed Min Speed rpm Max Speed rpm Peak Torque Ncm Cont. Torque* Ncm Min Speed rpm Max Speed rpm Peak Torque Ncm Cont. Torque* Ncm BDC1850 12 350 568 320 124 1800 114 75 BDC3030 20 584 341 190 206 3000 68 43 BDC6015 40 1168 170 85 412 6000 34 21 *Continuous torque at 50% of rpm range and 25 degrees Celcius. Torque Conversion Table In-lb to In-oz Multiply by 16 50 in-lb = 800 in-oz = 568 N-cm In-lb to N-cm Multiply by 11.36 30 in-lb = 400 in-oz = 341 N-cm N-cm to In-oz Multiply by 1.416 15 in-lb = 240 in-oz = 170 N-cm Fig 1 Fig 2 High Speed RPM Torque (N-cm) Max Torque Continuous Operation @ 25 C Continuo ...

Display Accuracy Mounting Rod: 12.7 mm (½”) diameter Speed: ± 1 rpm or ± 1% of reading 140 mm (5¼”) long Torque: ± 12 N-cm or ± 5% of reading Fig 3 Fig 4 Speed - High Speed LED - Low Speed LED Display - RPM LED - Torque LED Power - Power LED - Overload LED Zero Torque ± (RPM) Start/Pause - Pause LED BDC Specifications Keypad Membrane ...

1. The stirrer must be securely fixed to a stable support - e.g. clamped to an original Caframo stand that is on a stable, level surface. See Safety Instructions. CAUTION: This is not an explosion-proof stirrer. Do not use with highly flammable or explosive materials. WARNING: Be sure that the unit’s voltage is the same as the supplied voltage. Information on the unit’s voltage and current are located on the serial plate. This unit must always be connected to a grounded electrical outlet. 2. Chuck removal and attachment: Loosen the set screw with the allen key found on the chuck key. Remove chuck. To attach al ...

1. Make sure that the stirrer is securely mounted as specified in the installation instructions. Also make sure that the mixing paddle or impeller is securely attached in the desired position. 2. Connect the power cord to a grounded supply. 3. The stirrer is now ready for use to mix liquids and liquid/solid solutions. The operator, ensuring that all safety instructions are followed must determine appropriate impeller and container specifications. 4. The stirrer can operate continuously if the torque demand falls below the continuous torque operation line (see BDC Torque Capabilities Fig 1 and Fig 2). Should the ...

• Overload LED - This indicator will flash when an overload condition is approached. This indicator will remain on when an overload condition is reached and the stirrer is shut down. Overload conditions will occur when: • The torque demand is outside the unit’s capabilities (solution is too viscous). • The unit overheats due to extended operation at very high torque and/or speed demands. When the overload condition is due to torque demand, the stirrer will automat- ically reduce speed to reduce the load. If reduction in speed is not sufficient to k ...

Theory Torque (turning force) is a measure of the force on an object such as a shaft or a propeller. For example, pushing or pulling the handle of a wrench connected to a nut or bolt produces a torque (turning force) that loosens or tightens the nut or bolt. The units used to quantify torque are Newton-meters, Newton- centimeters, or foot pounds. In Mixing Applications the magnitude of torque depends on three quantities: First, the speed in revolutions per minute; second, the diameter of the propel- ler; and third, the viscosity of the material being mixed. Additionally, a small amount of torque is required to move the mixing ...

Cleaning Using a mild soap and water solution, wipe the housing and control panel of the stirrer with a damp cloth. Do not use chlorine bleach, chlorine-based cleanser, abrasives, ammonia, steel wool, or scouring pads with metal content or similar harsh solvents or abrasives. These may damage the surface of the stirrer. Service Do not attempt to service or repair a Caframo stirrer. If the stirrer housing is opened, the warranty becomes void. Contact Caframo for return authoriza- tion and return instructions. Clean the stirrer so that it is free from any materials which may be harmful. Provide an MSDS or other safety data sheet ...

Warranty Caframo warrants the herein described product of its manufacture for three years from receipt of the equipment by the purchaser, against defects in material and workmanship. Warranty registration is available on-line (www. caframo.com/lab/warranty.php) or by completing the supplied warranty regis- tration card. Mail or fax back as indicated. This limited warranty covers parts and labor. In the event of a warranty claim, contact Caframo. If the cause is determined to be a manufacturing fault, Cafra- mo will repair or replace all defective parts to restore the unit to operation. This warranty may only be altered ...

Instructions de sécurité...................................................................................................... 20 Instructions générales........................................................................................................ 21 Approbations des agitateurs............................................................................................... 21 Liste de contrôle................................................................................................................. 22 Description..................................................................................................... ...

1. Tous les utilisateurs devraient lire entièrement ce manuel et être familiarisés avec l’agitateur. 2. L’agitateur doit être bien fixé à un support stable. Monter l’agitateur sur un support Caframo (numéro de pièce A110), avec une fixation de qualité industrielle Caframo (numéro de pièce A120). Si un autre support ou une autre fixation est utilisé, l’agitateur doit être bien fixé et ne pas tomber si on l’incline de dix degrés par rapport à la verticale. 3. L’agitateur doit être alimenté à sa tension nominale. Voir la plaque indicatrice. 4. ATTENTION : Cet agitateur n’est pas un appareil ...