4IPNET OWL400 Quick Installation Manual

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 1 - Copyright Notice This document is protected by USA copyright laws and other laws and is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies o ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 2 - Preface Package Contents The 802.11 n/a compliant OWL400/410 is a Long Range Outdoor AP/ Bridge/ CPE device that can be used for dual purposes. First, it can be deployed as a traditional fixed wireless Access Point (AP). Secondly, it can be used as a Customer Premises Equipment (CPE) that connects to the outdoor wireless network of Wireless Internet Service Provider (WISP ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 3 - System Overview OWL400 1 Power Green LED ON indicates power on, and OFF indicates power off 2 WLAN Green LED ON indicates system ready 3 LAN Green LED ON indicates connection; BLINKING indicates transmitting data; OFF indicates no connection 4 PoE Connector For connecting to the Power Sourcing Equipment (PSE) 5 Reset Press more than 5 seconds and release to reset the syst ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 4 - OWL410 1 Power Green LED ON indicates power on, and OFF indicates power off 2 WLAN Green LED ON indicates system ready 3 LAN Green LED ON indicates connection; BLINKING indicates transmitting data; OFF indicates no connection 4 PoE Connector For connecting to the Power Sourcing Equipment (PSE) 5 Reset Press more than 5 seconds and release to reset the system to its defaul ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 5 - Hardware Installation OWL400/410 The following diagram is a basic network topology which can be used for testing and configuring the OWL400/410. Installation Steps: Step 1. Connect the antennas to the connectors. Step 2. Connect the PSE (POWER & DATA OUT) to the PSE 1 connector on the lower panel. Step 3. Connect one end of an Ethernet cable to the PSE 2 connector on the ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 6 - Getting Started 4ipnet OWL400/410 supports web-based configuration. OWL400/410 is a dual-mode system, AP Mode as the default mode for the first time entering the system, which also can be configured as either an access point (AP Mode) or a gateway (CPE Mode) based on your needs. It is required to follow the respective installation procedures provided to properly set up th ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 7 - Step 1: IP Segment Setup for Administrator PC Set a static IP address on the same subnet mask as OWL400/410 in TCP/IP of the administrator PC, such as the following example. Do not duplicate the IP address used here with the IP address of OWL400/410 or any other devices within the same network. >> Example of IP Segment: The valid range of IP address is 1 ~ 254. However, ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH - 8 - Step 4: Login Success After a successful login to OWL400/410, a System Overview page of web management interface will appear, To logout, simply click on the Logout button at the upper right hand corner of the interface. � Note: By default, AP mode is enabled. Therefore, the administrator must access the system via the AP mode login page for the first time. The administr ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 9 - Common Settings Step 1: Mode Confirmation � Ensure the Operating Mode is currently in AP mode. � Click on the Status button and then select the System Overview tab. The Operating Mode is at the System section on the System Overview page. 4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 10 - Step 2: Change Password � Click on the Utilities button and then select the Password tab. � Enter a new password in the New Password field and retype it in the Re-enter New Password field. � Click SAVE to save the changes. 4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299 ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 11 - Step 3: Network Settings �Settings here are for example only� � Click on the System button and then select the Network tab. � Enable Static, and then enter the related information in the fields marked with red asterisks. � Click SAVE to save the settings. 4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 8 ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 12 - Step 4: SSID Settings � Click on the Wireless button and then select the General tab. � Band: Select an appropriate band from the drop-down list box. � Click on the Wireless button and then select the VAP Config tab. � ESSID: Enter respective ESSID for each VAP in the ESSID field or use the default. ESSID (Extended Service Set Identifier) is ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 13 - Step 5: Security Settings � Click on the Wireless button and then select the Security tab. � Select the desired VAP Profile and Security Type from the drop-down list boxes. The above figure depicts an example of selecting VAP-1 and WEP. � Enter the information required in the blank fields. You must use the same information provided here to conf ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 14 - Step 1: Mode Confirmation � Ensure the Operating Mode is currently in CPE mode. � Click on the Status button and then select the System Overview tab. The Operating Mode is at the System section on the System Overview page. 4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299 ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 15 - Step 2: Change Password � Click on the Utilities button and then select the Password tab. � Change Root Account Password • Enter the old password in the Old Password field; default password is “admin”. • Enter a new password in the New Password field and retype it in the Re-enter New Password field. � Change Admin Account Password • E ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 16 - Step 3: Site Survey �The scan result displayed here is an example only.� � Click on the Wireless button and then select the Site Survey tab. � The system will automatically scan and display all APs in its coverage area. � Click Scan Again if the APs to be associated with are not listed on the Scan Result list. Step 4: Select AP to be Associ ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 17 - Step 5: Security Settings � The above figure depicts an example of selecting one SSID (encrypted via one security type). � Click Setup, and then a related encryption configuration box will appear. � Enter the information required in the configuration box. Information to be entered must be exactly the same as configured in this selected AP. � ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 18 - Step 6: Network Interface Configuration �Settings here are for example only� � Click on the System button and then select Network tab. � For WAN configuration, determine the way to obtain the IP address. For example, enable Static, and then enter the related information in the fields marked with red asterisks. � Click Save to save the setti ...

OWL400/410 Long Range Outdoor AP/ Bridge/ CPE ENGLISH © 2009 4IPNET, INC. - 19 - Step 7: LAN Configuration � Click on the System button and then select the Network tab. � The LAN Configuration section is on the same page as the WAN Configuration section. � Provide the information to the required field by entering IP address/Netmask of the LAN port. � Click SAVE to save all settings configured so far; all updated settings ...