Yealink W52P Quick Setup Manual

Ready? Yealink Cordless VoIP Phone Quick Setup Guide for the W52P Model 6732V-FTTH Set-up guide refresh V3.indd 1 2018/06/28 11:12 AM

Packaging contents 03 Base station description 04 Powering the base station 05 Setting up the charger cradle 06 Setting up the handset 07 Charging the handset 08 Additional handset registration only 09 Still not sorted? 10 6732V-FTTH Set-up guide refresh V3.indd 2 2018/06/28 11:12 AM

Belt clip Ethernet cable Two rechargeable batteries Quick Installation Guide & Quick Reference Guide 6732V-FTTH Set-up guide refresh V3.indd 3 2018/06/28 11:12 AM

Item Description 1 Paging Key Locates a misplaced handset. Toggles the registration mode. Resets the base station to factory settings. 2 Registration LED Indicates the mode of the base station. Fast flashes when the base station is in the paging mode. Slow flashes green when the base station is in the registration mode. Illuminates solid when there is at least one handset registered to the base station. 3 Network Status LED Indicates the network status. Slow flashes green when the network is unavailable. Illuminates solid green when the network is available. 4 Power Indicator LED Indicates the power status of the base station. Slow flashes green when the base station is during the firmware upgrading process. Slow flashes green when the base station is during the firmware resetting process. Illuminates solid green when the base station is powered on. 1 2 4 3 6732V-FTTH Set-up guide refresh V3.indd 4 2018/06/28 11:12 AM

connect the other end of the power adapter into the charging port on the base station • Connect the supplied Ethernet cable between the LAN port on the base station and the LAN port in your Vodacom router. The Ethernet cable should be connected to one of the available LAN ports on the router labelled LAN1, LAN2, LAN3 and LAN4 Powering the base station 6732V-FTTH Set-up guide refresh V3.indd 5 2018/06/28 11:12 AM

• Connect the other end of the power adapter into the charging port on the cradle Setting up the charger cradle 6732V-FTTH Set-up guide refresh V3.indd 6 2018/06/28 11:12 AM

• Insert the batteries in the handset correctly • Close the battery cover Setting up the handset 6732V-FTTH Set-up guide refresh V3.indd 7 2018/06/28 11:12 AM

LCD screen lights up • Place the handset in the charger cradle • The original handset included in the W52P package is pre-registered to the base station. After charging, the handset is ready for use Power Key Charging the handset 6732V-FTTH Set-up guide refresh V3.indd 8 2018/06/28 11:12 AM

2 Press the OK button on the handset to enter into the main menu. 3 Select Settings, then Registration and then Register Handset. 4 Press the Up or Down key to highlight the desired base station and then press the OK soft key. 5 Press the OK key when the LCD screen displays the RFPI code of the base station. 6 Enter the PIN. The default pin is 0000 (four zeros). 7 Press the Done Key. 8 The handset will play the warning tone and prompts “Handset Subscribed”, which indicates the handset is registered successfully. Additional handset registration only 6732V-FTTH Set-up guide refresh V3.indd 9 2018/06/28 11:12 AM

If you have further queries please direct them to the Customer Care on 082 1904 or [email protected] Still not sorted? 6732V-FTTH Set-up guide refresh V3.indd 10 2018/06/28 11:12 AM