Winmate 7'' S-Series Quick Start Manual

7~15” S-Series HMI Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz (Optional Quad Core) Android 6.0 Model No. W07FA3S-PCO1-POE W07FA3S-PCO1AC-POE W10FA3S-PCH2AC-PoE W10FA3S-PCH2-POE W10FA3S-PCH2LB R15FA3S-PCC3-PoE Quick Start Guide Document Version 1.1 Document Part No. 9152111I1138

Contents PREFACE 3 CHAPTER 1: INTRODUCTION 8 1.1 INTRODUCTION 9 1.2 PRODUCT FEATURES 9 1.3 UNPACKING 10 1.4 MECHANICAL DIMENSIONS 11 1.5 CONNECTOR DESCRIPTION 14 CHAPTER 2: GETTING STARTED 15 2.1 CONNECTING THE POWER 16 2.2 CONNECTOR DESCRIPTION 17 CHAPTER 3: MOUNTING 19 3.1 PANEL MOUNT 20 3.2 VESA MOUNT 21 CHAPTER 4: OPERATING THE DEVICE 27 4.1 HOME SCREEN 28 4.2 QUICK SETTINGS 29 4.3 ETHERNET 30 4.4 WINMATE® HOME MANAGER (WHM) 32 4.5 CONFIGURING SERIAL PORT SETTING 36 APPENDIX 38 APPENDIX A: PRODUCT SPECIFICATIONS 38 APPENDIX B: HF RFID READER SPECIFICATIONS 39

by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s) conveys no license or title under any patent, copyright, or masks work rights to these products, and make no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or guarantee that such application will be suitable for the specified use without further testing or modification. Warranty Our warranty guarantees that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. If the customer discovers a defect, we will, at his/her option, repair or replace the defective product at no charge to the customer, provide it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service. If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December). For example, the serial number 1W18Axxxxxxxx means October of year 2018. Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may need the following information ready before you call:  Product serial number  Software (OS, version, application software, etc.)  Description of complete problem  The exact wording of any error messages In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products.

Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important: An important note indicates information that is important for you to know. Caution/ Attention A Caution alert indicates potential damage to hardware and explains how to avoid the potential problem. Une alerte d’attention indique un dommage possible à l’équipement et explique comment éviter le problème potentiel. Warning!/ Avertissement! An Electrical Shock Warning indicates the potential harm from electrical hazards and how to avoid the potential problem. Un Avertissement de Choc Électrique indique le potentiel de chocs sur des emplacements électriques et comment éviter ces problèmes. Alternating Current Mise à le terre ! The Protective Conductor Terminal (Earth Ground) symbol indicates the potential risk of serious electrical shock due to improper grounding. Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à la terre incorrecte.

work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation est présente. Des composantes électroniques sensibles peuvent être endommagées par des sauts d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces chassis. Caution/ Attention Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant de toucher la carte CPU. Les équipements électroniques moderns sont très sensibles aux décharges d’électricité statique. Toujours utiliser un bracelet de mise à la terre comme précaution. Placer toutes les composantes électroniques sur une surface conçue pour dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis. For your safety carefully read all the safety instructions before using the device. Keep this user manual for future reference.  Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth.  For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible.  Keep this equipment away from humidity.  Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage.  The openings on the enclosure are for air convection and to protect the equipment from overheating.  Do not cover the openings.  Before connecting the equipment to the power outlet make sure the voltage of the power source is correct.  Position the power cord so that people cannot step on it. Do not place anything over the power cord.  If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over-voltage.  Never pour any liquid into an opening. This could cause fire or electrical shock.  Never open the equipment. For safety reasons, only qualified service personnel should open the equipment.  All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems appear: o The power cord or plug is damaged. o Liquid has penetrated into the equipment. o The equipment has been exposed to moisture. o The equipment does not work well or you cannot get it to work according to the user manual. o The equipment has been dropped and damaged. o The equipment has obvious signs of breakage.  Do not leave this equipment in an uncontrolled environment where the storage temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment. Caution/Attention Use the recommended mounting apparatus to avoid risk of injury. Utiliser l’appareil de fixation recommandé pour éliminer le risque de blessure. Warning!/ Avertissement! Only use the connection cords that come with the product. When in doubt, please contact the manufacturer. Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous doutez de leur provenance, contactez le manufacturier. Warning!/ Avertissement! Always ground yourself against electrostatic damage to the device. Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge pas sur vous.  Cover workstations with approved anti-static material. Use a wrist strap connected to a work surface and properly grounded tools and equipment.  Use anti-static mats, heel straps, or air ionizer for added protection.  Avoid contact with pins, leads, or circuitry.  Turn off power and input signals before connecting test equipment.  Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids and Styrofoam.  Use filed service tools, such as cutters, screwdrivers that are conductive.  Always put drivers and PCB’s component side on anti-static foam. General Guideline It is recommended to reboot the device when some functions are defect or inactive. If it still can't solve the problems please contact your dealer or agent.

This device complies with part 15 FCC rules. Operation is subject to the following two conditions:  This device may not cause harmful interference.  This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "B" digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at him own expense. EC Declaration of Conformity This equipment is in conformity with the requirement of the following EU legislations and harmonized standards. Product also complies with the Council directions. Electromagnetic Compatibility Directive (2014/30/EU)  EN55024: 2010 EN 55022: 2010 Class B o IEC61000-4-2: 2009 o IEC61000-4-3: 2006+A1: 2007+A2: 2010 o IEC61000-4-4: 2012 o IEC61000-4-5: 2014 o IEC61000-4-6: 2013 o IEC61000-4-8: 2010 o IEC61000-4-11: 2004  EN55022: 2010/AC:2011  EN61000-3-2:2014  EN61000-3-3:2013 Low Voltage Directive (2014/35/EU)  EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

Chapter 1: Introduction This chapter gives you product overview, describes features and hardware specification. You will find all accessories that come with the HMI in the packing list. Mechanical dimensions and drawings included in this chapter.

1.1 Introduction Congratulations on purchasing Winmate® S-Series HMI. Interactive and smart automation systems of intelligent buildings are in a fast growing phase. Winmate® multi-touch S-Series HMI is suitable for home automation and room management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing look for any interior. By connecting to centralized database, it can provide real time update for booking status and available schedule, or perform as a synchronous display in meetings. Winmate® S-Series HMI powered by Freescale® Cortex A9 i.MX6 Dual Core processor and support Android 6.0 operating systems. The HMI device features P-Cap touch-screen. In addition, the HMI device model supports an exceptional feature - LED Light Bar. With the help of red, green, blue and orange LED indicators you can see the status of the machine or processes afar. It significantly reduces power consumption by keeping the display turned off. 1.2 Product Features Winmate® S-Series HMI features:  7/ 10.1/ 15.6-inch widescreen panel  Projected capacitive multitouch screen  Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz (Optional Quad Core)  Android 6.0 operating system  1 x USB 2.0, 1 x USB OTG, 1 x CANBus, 1 x RS-232/422/485  Supports PoE IEEE 802.3at (25 W), IEEE 802.3af (15 W)  Fanless cooling system and ultra-low power consumption  Front IP65 water and dust proof, rear IP22  Light design for machine automation, smart factory and IoT applications

1.3 Unpacking Carefully remove the box and unpack your HMI device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. Standard factory shipment list:  HMI Device  Quick Start Guide (Hardcopy)  Driver CD & User Manual  AC Adapter (12V/ 50W) Varies by product specifications Part No. 9152111I1138 Part No. 9171111I102P Part No. 922D050W12VA  Power Cord  3 pin Terminal Block to DC Jack  VESA Screws Varies by country Part No. 94J602G030K0 Part No.913511101145 Package may include optional accessories based on your order  VESA Desk Stand PCVS-V1  VESA Desk Stand LA-100  VESA Wall Mount Bracket LA-106  Front Side Wall Mount PCFW-V1 Part No. 99KK00A0000E Part No. 9B0000000128 Part No. 9B0000000412 Part No. 99KK00A0000C

1.4 Mechanical Dimensions This section describes appearance, connectors’ layout and mechanical dimensions of S-Series HMI. Notice that this is a simplified drawing and some components are not marked in detail. Please contact our sales representative if you need further product information. 7-inch, W07FA3S-PCO1-POE/ W07FA3S-PCM1AC-PoE Unit: mm Dimensions:189.4 x 145.4 x 36.1 № Description № Description ① Micro SD Card Slot ⑦ 9-24V DC ② LAN/ PoE* ⑧ 2MP Front Camera (Optional) ③ USB OTG ⑨ 1W Speaker ④ CANBus ⑩ LED Status Light Bar (Only W07FA3S-PCM1AC-PoE) ⑤ RS-232/422/485 ⑪ HF RFID Reader (Optional) ⑥ USB 2.0 x 1 *Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W)

10.1-inch, W10FA3S-PCH2AC-PoE/ W10FA3S-PCH2-POE Unit: mm Dimensions:263.48 x 172 x 35.7 № Description № Description ① Mini USB Console(Linux use) ⑥ USB 2.0 x 1 ② Micro SD Card Slot ⑦ 12V DC ③ LAN/ PoE* ⑧ 2MP Front Camera (Optional) ④ USB OTG ⑨ LED Status Light Bar (Only W10FA3S-PCH2AC-PoE) ⑤ RS-232/422/485 ⑩ 1W Speaker *Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W) 10.1-inch, W10FA3S-PCH2LB Unit: mm Dimensions:263.48 x 172 x 35.7

№ Description № Description ① Mini USB Console(Linux use) ⑦ 12V DC ② Micro SD Card Slot ⑧ Micro HDMI ③ LAN/ PoE* ⑨ 12V DC (Phoenix type) ④ USB OTG ⑩ All-Around LED Status Light Bar ⑤ RS-232/422/485 ⑪ 1W Speaker ⑥ USB 2.0 x 1 ⑫ HF RFID (Optional) *Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W) 15-inch, R15FA3S-PCC3-PoE Unit: mm Dimensions:363.4 x 277 x 86 x 44.5 № Description № Description ① Mini USB Console(Linux use) ⑥ USB 2.0 x 1 ② Micro SD Card Slot ⑦ 12V DC ③ LAN/ PoE ⑧ 1 Watt Speaker ④ USB OTG ⑨ HF RFID Reader (Optional) ⑤ RS-232/422/485 *Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W)

1.5 Connector Description Terminal interfaces are located on the bottom side of the HMI device. Note: Notice that input and output connectors vary by product size and specifications. Terminal interfaces description: Item Description RJ45 – Connects HMI device to Ethernet network. Supports PoE for power transmission in network equipment, via network UTP cable, together with data. Terminal Block – Provides power to the HMI device, accepts 12V DC. Example: AC cord or DC power supply. If both are provided, choose only one. RS-232/422/485 – Connects external devices to HMI device. Example: A barcode reader or scanner to HMI device. USB 2.0- Connects USB 2.0 compatible devices to HMI device. Example: A printer to HMI device. CANBus – Transmits video from HMI device to external monitor. Example: An external monitor to HMI device. USB OTG – Connect to PC for client use and update OS Image. Console Port – Connect to PC for client use and updates in Linux system. MicroSD Card Slot – Insert microSD card to expand the storage.

Chapter 2: Getting Started This chapter tells you important information on power supply, adapter and precautions tips. Pay attention to power considerations.

2.1 Connecting the Power Installation Instruction: 1. Connect a 2-pin terminal block to the HMI connector. 2. Connect the other side of the terminal block to the AC adapter. 3. Connect the AC adapter to the power cord. 4. Plug in the power cord to a working AC wall outlet. The device will boot automatically. Note: Based on the model, terminal block connector may be located either on the bottom or on the rear side of the HMI device. Note: Power cords vary in appearance by region and country.

2.2 Connector Description 2.2.1 Power Input Connector The DC power source input of the S-Series HMI is a 2 pin terminal block connector that supports 9-24V DC or 12V DC power input depending on your model. Pin assignment and connector description of terminal block connector. 2.2.2 Serial Port Connector The S-Series HMI has one serial port connector to connect your HMI to external devices such as mouse, modem or printer. You can configure serial port settings via APP. Pin assignment and connector description of serial port connector. *Default setting: RS-232 2.2.3 Ethernet Connector The S-Series HMI device supports one RJ45 10/100/1000 Mbps Ethernet interface for connecting to the internet. Pin assignment and connector description of RJ45 connector. Important Power Device (PD): IEEE 802.3at (25 W), IEEE 802.3af (15 W) 2.2.4 USB Connector Use USB A Type (USB 2.0) connector to connect your HMI device to other USB 2.0 compatible devices. Voltage Please check product specifications before connecting to the power source. Pin № *RS-232 RS-422 RS-485 1 DCD TxD- D- 2 RXD TxD+ D+ 3 TXD RxD+ NC 4 DTR RxD- NC 5 GND GND GND 6 DSR NC NC 7 RTS NC NC 8 CTS NC NC 9 RI NC NC Pin № Signal Name Pin № Signal Name 1 TX1+ 2 TX1- 3 TX2+ 4 TX2- 5 TX3+ 6 TX3- 7 TX4+ 8 TX4-

Pin assignment and connector description of USB connector. 2.2.5 USB OTG Connector Use USB OTG connector to connect the panel PC to other USB On-The-Go compliant devices such as flash drives, digital cameras, mice or keyboards. Use USB OTG cable to install software on the panel PC. Pin assignment and connector description of USB OTG connector 2.2.6 CANBus Connector The connector secured to the motherboard with two screws. Pin assignment and connector description of CANBus connector 2.2.7 Micro SD Card Slot Insert microSD card to microSD card slot to extend the memory of your HMI device. Pin assignment and connector description of micro SD card slot. Pin № Signal Name Pin№ Signal Name 1 +5V 2 USB_D- 3 USB_D+ 4 GND Pin № Signal Name Pin № Signal Name 1 +5V 2 USB_OTG_D- 3 USB_OTG_D+ 4 USB_OTG_ID 5 GND Pin № Signal Name Pin № Signal Name 1 GND 2 CAN_L 3 GND 4 NC 5 NC 6 NC 7 CAN_H 8 GND 9 +5V/NC Pin № Signal Name Pin № Signal Name 1 DATA2 2 DATA3 3 CMD 4 +3.3V 5 CLK 6 GND 7 DATA0 8 DATA1 9 Card_Det

Chapter 3: Mounting This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages.

3.1 Panel Mount Panel mount mounting solutions is suitable for many applications where HMI should be embedded in the machine. With this mounting solution flat surface leave no bezel in the front. Size Wall Cutout Screw Hole Diameter 7” 249 x 157.6 mm M3 x 4mm 10.1” 249 x 157.6 mm M3x4 mm 15.6” 360 x 292 mm M3x5 mm Installation Instruction 1. Prepare a fixture for the specific dimensions of the device. 2. Cut a hole on a sub frame or panel according to the cutout dimensions. 3. Install the device properly onto the cutout area of the sub frame or panel with the sides of the front bezel. 4. Fix the device to fixture with eight Philips M3x4 screws. Note: Make sure that the eight holes on gasket can fit in the mounting holes on the device.

3.2 VESA Mount 3.2.1 VESA Desk Stand PCVS-V1 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Model Name PCVS-V1 Part No. 99KK00A0000E Installation Instruction Use provided Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device. Dimensions

3.2.2 VESA Desk Stand LA-100 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Model Name: LA-100 Part No. 9B0000000128 Installation Instruction Use provided Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device. Dimensions

3.2.3 VESA Wall Mount Bracket LA-106 The HMI device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Model Name LA-106 Part No. 9B0000000412 Installation Instruction

3.2.4 Front Side Wall Mounting You can purchase Front Side Wall Mount Bracket from Winmate as an optional accessory to 10.1” S-Series HMI. Model Name PCFW-V1 Part No. 99KK00A0000C Mounting Instruction 1. Cut a hole in the wall according to the cutout dimensions. 2. Attach the bezel with clips to the device; fix the bezel with Philips M4x5 screws. 3. Connect the device to the power source with the power cord. 4. Install the device properly onto the in-wall cut-out area; fix the device using the clips.

Chapter 4: Operating the Device In this chapter you will find instructions on how to operate the HMI device.

4.1 Home Screen Your device runs on Android 7.1 Operation System (Default). Back Opens the previous screen you were working in, even if it was in a different app. Once you back up to the Home screen, you can’t go back any further. Home Returns to the Home screen. To get suggestions based on the screen you’re currently viewing, touch & hold this button. Overview Opens a list of thumbnail images of screens you’ve worked with recently. To open one, touch it. To remove a screen from the list, swipe it left or right or touch the X. Your apps To see all your apps, touch in the Favorites tray on any Home screen. This is where you can see all your apps, including those that come with your phone or tablet and those you downloaded on Google Play. You can move app icons to any of your Home screens. The apps you’ve used most recently appear in the first row. To add an app to a Home screen: 1. Go to the Home screen where you want to place the app. 2. Touch All Apps . 3. Swipe from left to right to find the app you want. 4. Touch & hold the app until the Home screen appears, slide it into place, and lift your finger. Navigation Buttons

4.2 Quick Settings You can open your device’s Settings app from the All Apps screen or from Quick Settings. For example, to change notification sounds, and volume go to Settings > Device > Sound to change the volume. Use Quick Settings to easily change frequently used settings, like turning on Wi-Fi. To open Quick Settings, swipe down from the top of the screen with two fingers. To change a setting, just touch the icon:  Display brightness: Slide to lower or increase the brightness of your screen.  Wi-Fi network: Turn Wi-Fi on or off or open the Wi-Fi settings menu.  Bluetooth settings: Turn Bluetooth on or off or open the Bluetooth settings menu.  Auto-rotate: Lock your device’s orientation in portrait or landscape mode. Open the main Settings menu by touching Settings at the top right.

4.3 Ethernet 1. Connect Ethernet Cable to the HMI. 2. Touch All APPS icon, and the open Ethernet application. 3. Ethernet APP main menu appears

4.3.1 Configuring Ethernet Go to All Apps > Ethernet > Configure Ethernet *Ethernet OFF is set by default. Swipe Ethernet ON to activate Ethernet connection. Connection Type Setting Description DHCP The device automatically capture IP-address from the router Static IP Allows to manually set up IP-address, DNS, Network and Gateway 4.3.2 Checking Ethernet Settings To check Ethernet settings: Go to All Apps > Ethernet > Check Ethernet Ethernet settings menu appears on the top right side of the desktop.

4.4 Winmate® Home Manager (WHM) Winmate® S-Series HMI comes with preinstalled APP called Winmate® Home Manager (WHM) which let the device manager to lock the launcher then the user can only use one application assigned by the device manager. 4.4.1 How to Lock Applications To lock applications: 1. In the main APPS window, select the Home Manager APP and tap it to open. Menu Description Home Manager Set which app you want to run up automatically after booting Password Manager Set the WHM password (Default password is “0000”). About Displays information about Home Manager 2. Go to “Application Selector”, and choose the app which you want to run up automatically after booting.

3. Go back to “Home Selector” and press “Clear and Reset Default Home”. 4. Select “Restrict Home” and “Always”, and then restart the computer to enable these settings.

The system will automatically start the application which you selected and lock it. Any time user presses home key or back key; the system will go back to the same application which you have selected. 4.4.2 How to Unlock Applications Follow the instruction below to reset Home Manager. 1. If you want to reset the home manager, pull down the left side to open the status bar and open HomeManager. 2. System will request the password to login. Touch OK.

Default password is “0000”. 3. Restart the system and you will go back to the normal Launcher. 4.4.3 How to Change Password To change the password: 1. Go to Password Manager and set your own password for this APP. 2. The default password is “0000”. Enter a new password in New Password field, and then tap Change Password.

4.5 Configuring Serial Port Setting Serial port setting can be configured for RS-232, RS-422 or RS-485. Winmate provide serial port settings application for Android OS. To configure serial port settings: 1. Settings > Accessibility. 2. Accessibility > System: Comport-Setting.

3. Comport-Setting > Comport 1/ Comport 2/ Comport 3 * Select Comport 1/ Comport 2/ Comport 3 that you want to configure. 4. Comport 1 > RS232/RS422/RS485 * Configure Comport 1 settings

Appendix Appendix A: Product Specifications Model Name W07FA3S- PCO1-POE W07FA3S- PCO1AC-POE W10FA3S- PCH2-POE W10FA3S- PCH2AC-PoE W10FA3S- PCH2LB R15FA3S-PCC3- PoE Display Size/ Type 7" TFT (Wide) 7" TFT (Wide) 10.1" TFT (Wide) 10.1" TFT (Wide) 10.1" TFT (Wide) 15" Resolution 1024 x 600 1024 x 600 1280 x 800 1280 x 800 1280 x 800 1024 x 768 Brightness 1000 nit 1000 nit 350 nit 350 nit 350 nit 250 nit Contrast Ratio 500:1 (typ.) 500:1 (typ.) 800:1 (typ.) 800:1 (typ.) 800:1 (typ.) 700:1 (typ.) Viewing Angle -75~75(H);- 75~70(V) -75~75(H);- 75~70(V) -85~85(H); -85~85(V) -85~85(H);- 85~85(V) -85~85(H);- 85~85(V) -80~80(H);- 70~70(V) Max Colors 16.7M 16.7M 16.7M 16.7M 16.7M 16.7M Touch PCAP PCAP PCAP, AG Coating (Optional) PCAP, AG Coating (Optional) PCAP, AG Coating (Optional) PCAP, AG Coating(Optional) System Specifications Processor Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (Optional Quad Core) Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (Optional Quad Core) Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (Optional Quad Core) Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (Optional Quad Core) Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (Optional Quad Core) Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (Optional Quad Core) Memory 1 GB LPDDR3 (Optional 2 GB) 1 GB LPDDR3 (Optional 2 GB 1 GB LPDDR3 (Optional 2 GB 1 GB LPDDR3 (Optional 2 GB 1 GB LPDDR3 (Optional 2 GB 1 GB LPDDR3 (Optional 2 GB Storage 16 GB eMMC (default), Micro SD card 16 GB eMMC (default), Micro SD card 16 GB eMMC (default), Micro SD card 16 GB eMMC (default), Micro SD card 16 GB eMMC (default), Micro SD card 16 GB eMMC (default), Micro SD card OS Android 6.0 (Default), Ubuntu 16.04 Android 6.0 (Default), Ubuntu 16.04 Android 6.0 (Default), Ubuntu 16.04 Android 6.0 (Default), Ubuntu 16.04 Android 6.0 (Default), Ubuntu 16.04 Android 6.0 (Default), Ubuntu 16.04 Audio Speaker 1 x 1 Watt Speaker 1 x 1 Watt Speaker 1 x 1 Watt Speaker 1 x 1 Watt Speaker 1 x 1 Watt Speaker 1 x 1 Watt Speaker User Controls LED Light Bar N/A RGB Light Bar N/A RGB Light Bar All-Around RGB Light Bar N/A Camera Front Camera 2MP (Optional) 2MP (Optional) 2MP (Optional) 2MP (Optional) N/A 2MP (Optional) Input / Output Connectors Power 2 Pin Terminal Block 2 Pin Terminal Block 2 Pin Terminal Block 2 Pin Terminal Block 2 Pin Terminal Block 2 Pin Terminal Block Ethernet 1 x RJ 45- 10/100/1000 Mbps, LAN support PoE 1 x RJ 45- 10/100/1000 Mbps, LAN support PoE 1 x RJ 45- 10/100/1000 Mbps, LAN support PoE 1 x RJ 45- 10/100/1000 Mbps, LAN support PoE 1 x RJ 45- 10/100/1000 Mbps, LAN support PoE 1 x RJ 45- 10/100/1000 Mbps, LAN support PoE USB Port 1 x USB 2.0 host, 1 x USB OTG 1 x USB 2.0 host, 1 x USB OTG 1 x USB 2.0 host, 1 x USB OTG 1 x USB 2.0 host, 1 x USB OTG 1 x USB 2.0 host, 1 x USB OTG 1 x USB 2.0 host, 1 x USB OTG Serial Port 1 x RS- 232/422/485 1 x RS- 232/422/485 1 x RS- 232/422/485 1 x RS- 232/422/485 1 x RS- 232/422/485 1 x RS- 232/422/485 CANBus 1 x CANBus 1 x CANBus 1 x CANBus 1 x CANBus 1 x CANBus 1 x CANBus SD Card Slot 1 x Micro SD Card Slot 1 x Micro SD Card Slot 1 x Micro SD Card Slot 1 x Micro SD Card Slot 1 x Micro SD Card Slot 1 x Micro SD Card Slot Power Specifications Power Input 9~24V DC 9~24V DC 12V DC 12V DC 12V DC 12V DC PoE Power Device: IEEE 802.3at (25 W), IEEE 802.3af (15 W) Power Device: IEEE 802.3at (25 W), IEEE 802.3af (15 W) Power Device: IEEE 802.3at (25 W), IEEE 802.3af (15 W) Power Device: IEEE 802.3at (25 W), IEEE 802.3af (15 W) Power Device: IEEE 802.3at (25 W), IEEE 802.3af (15 W) Power Device: IEEE 802.3at (25 W), IEEE 802.3af (15 W) Power Consumption 10 W 10 W 12 W 12 W 12 W 19W

x 36.1 mm 189.4 x 145.4 x 36.1 mm 263.28 x 171 x 35.7 mm 263.28 x 171 x 35.7 mm 263.28 x 171 x 35.7 mm 363.40 x 277.86 x 44.50 mm Mounting Panel mount, VESA 75x75 Panel mount, VESA 75x 75 Panel mount, VESA 75x75, Front Mount Panel mount, VESA 75x75, Front Mount Panel mount, VESA 75x75, Front Mount Panel mount, VESA 100x100 Cooling Fanless Fanless Fanless Fanless Fanless Fanless Environment Considerations Operating Temp. 0 °C to 50 °C 0 °C to 50 °C 0 °C to 50 °C 0 °C to 50 °C 0 °C to 50 °C 0 °C to 50 °C Humidity 10% to 90% (non- condensing) 10% to 90% (non- condensing 10% to 90% (non- condensing 10% to 90% (non- condensing 10% to 90% (non- condensing 10% to 90% (non-condensing IP Rating Front: IP65, Full: IP22 Front: IP65, Full: IP22 Front: IP65, Full: IP22 Front: IP65, Full: IP22 Front: IP65, Full: IP22 Front: IP65, Full: IP22 Certification Safety CE, FCC CE, FCC CE, FCC CE, FCC CE, FCC CE, FCC Appendix B: HF RFID Reader Specifications The HF RFID Reader of this device supports the following card type. HF RFID Standard Purpose ISO-14443 A Standard for MIFARE technology, which used in smart cards and proximity cards ISO-15693 Standard for tracking items

New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright © Winmate Inc. All rights reserved.