YachtSafe W100 Manual 

E 114 18.04’ Version 2018 l VETEL AB l [email protected] l www.yachtsafe.se l Gothenburg l Sweden YachtSafe Manual Vibration sensor W100 Vibration sensor ...

Release the screws with a cross-headed screwdriver to be able to open up the product and mount the battery. The LED lamp is flashing if the battery is OK. Installation of Vibration sensor Technical specifications Measurements: Battery lifetime: Battery capacity: Distance range (free sight): Temperature range: Sealing: 72 x 35 x 23 mm up to ...

to the G32 system via the app for iOS or Android: Image 1 Select Alarm accessories & Relay Image 2 Add & configure accessories Image 3 iOS: New accessory Android: Choose alarm accessory Image 4 Choose the accessory to connect. Enter a name for the accessory and then press Connect and follow ...

When you have activated, the small LED-light on the accessorie should blink rappidly when the connection is OK. If connection failed it will only turn the LED- light on once for aprox 1-2 sec. If you do not get any response in the app, try again. When activation is successfull you are ready to mount the magnet alarm. ...