VCS VideoJet 10 Manual 

Text of the manual

This manual is the intellectual property of VCS and is protected by

copyright. All rights are reserved. No part of this document may be reproduced or transmitted for any purpose, by whatever means, be they electronic or mechanical, without the express written permis- sion of VCS. Edition: February 2003 (Version 1.0) © Copyright 2003 VCS Video Comm

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 EU Guidelines . . . . . . . . . . . . . . . . .

Configuration with web browser . . . . . . . . . . . . . . . . . . . . . . 29

Establishing the connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Configuring the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Function test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

These Installation and Operating Instructions are intended for per-

sons authorised to install and operate the VideoJet 10. Interna- tional, national and any relevant regional regulations relating to electronics must be observed at all times. The Operating Instruc- tions explain the installation and operation of the VideoJet 10. Conve

The following typographic conventions are used in this manual:

Configuration Window and menu names, parameters and buttons [Enter], [C] Key names [Ctrl] + [C] Two or more keys that are pressed simul- taneously. ping Command line input and output all-guides com

The Network Video Server VideoJet 10 serves to transmit video,

audio and control signals via data networks (Ethernet LAN, Inter- net). It is designed for use in CCTV systems. The connection of an external alarm generator allows various functions to be triggered automatically. Other applications are not permitted. In the eve

Electrical shock hazard

! Never attempt to connect the unit to any power network other than the one for which it was intended. ! Use only the mains lead supplied. ! Do not open the housing. ! Disconnect the power supply unit from the mains power supply and from all other devices if a fault occurs. ! Install the power suppl

Installation and operation

! All applicable electrical codes and regulations must be observed and followed at all times during the installation. ! Before installing or operating the system, ensure that you have read and understood the documentation for other equipment connected to the unit, e.g. cameras. These contain import

Other Network Hardware Manuals