PSI PP 4050XP Operation & User’s Manual

...

A Publication of PSi Laser GmbH Hommeswiese 116 a 57258 Freudenberg / Germany � http://www.psi-laser.de Version:5112 991 18262 January 2017 Great care has been taken to ensure that the information in this handbook is accurate and complete. However, should any errors or omissions be discovered or should any user wish to make suggestions for improving this handbook, please feel encouraged ...

4060 and the intelligent Paper Stacker iPS 4050E The LED printer PP 4050/PP4060 and the intelligent Paper Stacker iPS 4050E fulfils the safety regulations according to IEC 60950-1 for information technology equipments. Note: The commercial name of the iPS 4050E is iPS 4050). The mains cable must be connected to a ground protected wall-socket. The printer's voltage has to be in accordance with the loca ...

Type: Printer PP 4050/PP 4060 and the intelligent Paper Stacker iPS 4050E corresponds to the laws and regulations ruling electromagnetic compatibility of appliances (2014/30/EU) and, therefore, fulfils the requirements for conformity marking with the CE-sign. To guarantee that the device stays within the limits according to the approval regulations for conducted and ...

� 100 - 110 V (-10/+6%) AC, 12 A (average) � 110 - 120 V (-10/+6%) AC, 12 A (average) � 220 - 240 V (-10/+6%) AC, 6 A (average) � 50 - 60 Hz Note: To avoid an overload of the electric circuit support (particularly for 100 to 110 or 110 to 120V) connect the power-supply plug of the printer into a separate protected power wall socket. Power Consumption � Operat ...

Keep feet clear. See instructions manual. Safety Regulations IV Caution, the chain of the motor to move the paper exit tray up and down will start automatically or after pushing the key at the front side of the table. Caution, the paper exit tray moves up and down automatically or after pushing the key at the front side of the table. Keep your feet clear when the paper exit tray moves down. Ensure that the cables at the rear of the p ...

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIII About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIII Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIV 1. Installing the Printer and intelligent Paper Stacker . . . . . . . . . . . . . . 1-1 1.1 Requirements ...

VI 1.8 Handling of the Tractor Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . 1-20 1.9 Inserting Fanfold Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21 - Inserting paper for the first time or changing to another paper width 1-22 1.10 Operating the intelligent Paper Stacker (iPS) . . . . . . . . . . . . . . . . 1-23 1.10.1 Adjusting the Paper Exit Tray . . . . . . . . . . . . . . . . . . . . . . . ...

VII 3.5 Menu Mode Item Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 � Select Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 � Paper Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 � PCL Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 � Hexdump Menu . . . ...

VIII 4.2.2 PCL MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 � FONT NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 � PITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 � POINT SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 � SYMBOL SET . . . . . . . . . . . . . . . . . ...

IX � TRACTOR POLL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25 � RECALL FACTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25 � RESET DEVELOPER INFO . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 � RESET OPC INFO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 � RESET FUSER INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 4.3.2 CL ...

X 5.5 User Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 5.5.1 Cleaning the Paper Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 5.5.2 Cleaning the Transfer Charger Unit . . . . . . . . . . . . . . . . . . . . . . . 5-18 5.5.3 Cleaning the Ozone Filter below the Transfer Charger . . . . . . . . 5-19 5.5.4 Cleaning the Ozone Filter in the Top Cover . . . . . . . . . . . . . . . ...

XI Appendix A Programming Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 A-1 Support of Printer Specific Features and Functions . . . . . . . . A-2 A-1.1 Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 A-1.2 Paper Size Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 A-1.3 Paper Path Control . . . . . . . . . . . . . . . . . . . . . . . ...

XII A-4 Support for Semigraphics for SAP/R3 . . . . . . . . . . . . . . . . . . A-26 A-5 Bar Code Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-27 A-5.1 Resident Bar Code Font Code 39 HP Compatible . . . . . . . . A-27 A-5.2 Resident Bar Code Controlled by Private Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . A-28 A-5.2.1 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A ...

This manual covers the printer in combination with the interface module, the Personality Module. The Personality Module (PM) is an integral part of the printer which determines the functionality of the printer especially regarding the user and system interface. The structure of this manual is such that the operator is led step-by-step through the various procedures. Starting with unpacking and installation of the consumables ...

In this chapter are the individual menu items are explained in detail. 5. Maintenance This chapter explains how to replace the consumables and maintain the printer. 6. Trouble Shooting and Diagnostics suggests how to identify and correct simple problems. 7. Technical Data All technical details or data about the printer can be found here. 8. Paper Specification Guidelines, Specification, Paper and Label pr ...

and 2. The Bar code Programming is decribed in section 3. These command structures are valid for a PP 4050 / PP4060 Laser Printer with PCL5 Emulation. Appendix B Symbol Sets All supported Symbol Sets are listed. Appendix C Miscellaneous � Order Numbers � Printer Driver Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuello ...

specified period of inactivity, the printer changes to a low power state. When a print job is received, the printer resumes the operating mode. This function is changeable in the Configuration Menu with the item POWER SAVE. Standard setting is 15 minutes. Conventions Used in this Guide The following conventions are used: Bold Headlines and important informati ...

1.1 Requirements to the location of the printer In this chapter the preconditions are described concerning the environment, the physical prerequisites, and the demand for space which are required for installation of the printer. 1.1.1 Environmental conditions � Temperature and Humidity The following table shows the values of temperature and relative humidity which are specified for the printer a ...

1-2 � Air circulation In general there are no restrictions concerning air circulation. However, it is to be observed that the air flow does not move the fanfold paper heavily at the paper entry and paper exit of the printer and such may lead to paper jams. In conjunction with the paper stacking system care has to be taken that the air flow does not disturb a proper operation of the stacker. � Imp ...