Siemens Simatic SM331 Getting Started

Text of Siemens Simatic SM331 Getting Started

SIMATIC SIMATIC SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA

______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ Preface 1 Requirements 2 Introduction 3 Mechanical setup of the example station 4 Electrical connection 5 Configuration of the SIMATIC Manage

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded

SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA

Getting Started, 11/2006, A5E00253410-02 iii Table of contents 1 Preface ................................................................................................................................................... 1-1 1.1 General .......................................................................

Table of contents

SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA iv Getting Started, 11/2006, A5E00253410-02 7 Testing the user program........................................................................................................................ 7-1 7.1 Downloading system data and user program ..................................................

SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA

Getting Started, 11/2006, A5E00253410-02 1-1 Preface 1 1.1 General Purpose of the Getting Started The Getting Started gives you a complete overview of the commissioning of the analog module SM331. It assists you in the installation and configuration of the hardware of a 4- 20mA sensor and the configuration

SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA

1-2 Getting Started, 11/2006, A5E00253410-02

Siemens Control Unit Owners Instructions: