Pro-Ject Audio Systems CD Box RS2 T Instructions For Use

Text of the manual

© Pro-Ject Audio Systems · Pro-Ject CD Box RS2 T · Revision 2019.06.12

2 Dear music lover, thank you for purchasing a Pro-Ject Audio Systems CD player. In order to achieve maximum performance and reliability you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. Important notice. Caution! Las

© Pro-Ject Audio Systems · Pro-Ject CD Box RS2 T · Revision 2019.06.12

3 Inserting and removing a disc Open the top lid and remove the magnetic clamp. Insert the disc with the label side facing upwards, place the magnetic clamp on the disc and close the lid. After “Reading” display shows the total number of tracks on the disc and the total duration of

© Pro-Ject Audio Systems · Pro-Ject CD Box RS2 T · Revision 2019.06.12

4 Button on top turns the unit on or back to standby. (The lever switch must be in the up position) , , and have the same functions as front panel buttons Selecting tracks 1 - 9 and 0 accesses a specific track directly and start playback. For example, to play track 19, press "0" or "

© Pro-Ject Audio Systems · Pro-Ject CD Box RS2 T · Revision 2019.06.12

5 Replacing batteries Proceed as follows: • Unscrew 4 screws on the back side of remote and remove whole back side • Replace the battery - Make sure the battery is the right way round ! • Put the back side on its place and screw all screws back Battery type: 1 x CR2032 / 3V or 1

Other CD Player Manuals