Toa RX-208 Operating Instructions Manual

TOA MIXING CONSOLE Model RX-208, RX-212, RX-216 RX-208 RX-212 RX-216 TOA ELECTRIC CO, LTD KOBE, JAPAN ...

Features ................................................... 2 Front Panel, Input Section ................................... 3 Front Panel, Output Section .................................. 4 Meter Panel ................................................ 5 Rear Panel (RX-208) ........... ...

program outputs, 2 foldback outputs, and 1 echo output. Each input channel and line output has a balanced, low impedance, transformer-isolated, XLR connector, and an unbalanced, 1/4" jack. Each input channel includes an accessory send/receive jack for in ...

Peak Indicator The peak indicator lights if clipping occurs in the pre-amp stage of the corresponding input channel. When the light comes on, an adjustment must be made with the Input Level Selector Switch and/or the Input Trim control. Input Level Selector Switch (INPUT) Selection is made in accordance with the output of the micro ...

FB 1 Volume Control (FB1) This control attenuates the echo- return signals from the built-in echo or an external echo unit and assigns them to the FB 1 mixing bus. FB 2 Volume Control (FB2) This control attenuates the echo- return signals from the built-in echo or an external echo unit and assigns them to the FB 2 mixing bus. Ster ...

Two channel, 1/1 octave graphic equalizer with 9 bands (filters) enables 12dB of boost and attenuation at each center frequency with the "0" position of each filter providing flat response. The graphic equalizer is switchable to either the program or foldback outputs, or "off for A-B comparison. Pro ...

RX-208 Program Line Output Connectors and Jacks (LINE OUT, PGM L, R) These connectors and jacks are the outputs of the console deriving the signals after each program master fader. The XLR connectors are balanced, transformer-isolated, floating, with an output impedance and nominal level of 600 ohms and +4dB, respectively. The phone jacks ...

The RX-212 and RX-216 are the same as the RX-208 in functions, except that the RX-212 has 12 input channels and the RX-216 has 16 input channels. RX-212 Program Line Output Connectors and lacks (LINE OUT, PGM L, R) Power Switch (POWER) Power Fuse Phantom Power Switches (PHANTOM 1~12) Accessory Send/Receive Jacks (ACCESSORY 1~12) C ...

Main Speaker Systems (Left) These XLR connectors are bal- anced, transformer-isolated, floating and accept low imped- ance sources of from +10dB to —60dB nominal level. The input level must be adjusted by the in- put level selector switch and trim control. Wireless Tuner Keyboard Unbalanced input jacks ac- ce ...

4-way multiple driving Main Speaker Systems (Left) 4-way multiple driving RX-216 RX-212 STAGE LAYOUT EXAMPLE - 9 - - 10 - ...