sewerin m130 Operating Instructions

Text of sewerin m130 Operating Instructions

sewerin m130 This product may only be used after the operating instructions have been

read and understood and only by appropriately trained operators. This product may only be used for its designated purpose, and only in industry and trade. Repair work may only be carried out by appropriately trained persons. Changes and modifications to the product may only be carried out with the consent of Hermann Sewerin GmbH. Unauthorised modifications to the product render th

Valve Box Locator M 130

Locating buried objects of metal GB 103452 / 01 / 01.09.2001 Design The Valve Box Locator M 130 is a one-piece unit comprising a control unit and a search coil which are connected by a combined handle and shaft. Operation with batteries / accumulators Insret four size AA batteries (MN1500 or LR6 Alkaline batteries). You may also use rechargeable NiCd batteries. Remove the cover at the end of the housing to insert the batteries. Ob

Again holding the search coil well away from any metal, adjust the

control knob until the unit is on the verge of producing a low-frequency buzz or tickover sound. This is the most sensitive setting. In use it will usually be found that the knob can be turned back somewhat from this position. When metal is detected, the sound will rise in frequency to a whine and the red LED will illuminate. The most sensitive point of the search coil is its centre. The

sewerin Metal Detector Owners Instructions: