Thinklogical Velocitykvm Series Quick Start Manual

Velocitykvm Multi-Mode Fiber Extension Systems Milford, Connecticut, USA An overview of the Velocitykvm Dual-link and Single-link, Multi-Mode Fiber Extension Systems -4, 5, 8, 24, 28, 34, 35 & 38 Extend Distribute Innovate

Thinklogical LLC™100 Washington Street Milford, Connecticut 06460 U.S.A. Telephone 1-203-647-8700 All trademarks and service marks are property of their respective owners. Subject: Velocity Multi-Mode Fiber Extension System Product Overview Revision: B, July 2011 Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical™ products. Powered by MRTS Technology Telephone Telephone Product Support: Contact Product Support by telephone in Milford, CT at 1-203-647-8700. The support lines are manned Monday through Friday, 8:30am to 5:00pm, Eastern Time Zone. Telephone Sales: Contact our expert sales staff by telephone in Milford, CT at 1-203-647-8700 or, if in the continental US, you may use our toll-free number 1-800-291-3211. We are here Monday through Friday from 8:30am to 5:00pm, Eastern Time Zone. Ask for your representative’s direct dial phone number when you call. International Sales: Please contact our US sales staff in Milford, CT at 1-203-647-8700. We are here Monday through Friday, 8:30am to 5:00pm, Eastern Time Zone (same as New York City). If leaving a voice message please let us know the best time to call back so we may reach you at your convenience. Our switchboard attendant will direct your call during regular business hours. We have an automated attendant answering our main telephone switchboard after regular business hours and on holidays. You can leave a voice message for any individual at any time. Our sales representatives have direct numbers to speed up your next call to us. Email Thinklogical™ is staffed Monday through Friday from 8:30am to 5:00pm, Eastern Time Zone. We will do our best to respond to your email inquiries promptly. Please use the following email addresses for your various needs: [email protected] – Information on Thinklogical™ and our products. [email protected] – Sales Department - orders, questions or issues. [email protected] – Product support, technical issues or questions, product repairs and request for a Return Merchandise Authorization (RMA) number. Fax Our company facsimile number is 1-203-783-9949. Please indicate the nature of the fax on your cover sheet and provide return contact information. HOW TO CONTACT US: 2 Extend Distribute Innovate PHONE: 1-800-291-3211 WEBSITE: www.thinklogical.com EMAIL: [email protected] PHONE: 1-800-291-3211 WEBSITE: www.thinklogical.com EMAIL: [email protected]

Velocity KVM Extension Systems are designed for high performance visual applications that require video as well as peripheral support. The system allows users, via optical fiber, to station and operate a digital monitor(s) and peripherals from just a few meters away to up to 40 kilometers away from the controlling computer, securely and without loss of resolution. Velocity KVM products are ideally suited for a wide range of applications in the broadcast and post-production field, as well as command and control centers, universities, large scale digital signage and other commercial KVM applications. The Velocity KVM Multi-Mode Fiber Extender standard model from Thinklogical™ includes: Multi-mode fiber for extension distances up to 350 meters Two DVI Displays Supports USB HID, USB 1.1 and (optional) USB 2.0 (up to 480 Mbps) The Future of Access and Control Velocitykvm-24 enter Powered by MRTS Technology Multi-Mode Fiber KVM Extension System DVI Two Display Transmitter System Features Each Velocity KVM Multi-mode Fiber system includes the following features: Supports all single-link DVI video resolutions (Velocity KVM Extension. System-5 supports one single-link DVI or RGB and all single-link DVI resolutions). 6.25 Gbps signal transmission via fiber optic cable; No RF interference. Requires one, two, three, four or five fiber optic cables, depending on application. Flawless image quality with no frame dropping. Local KVM connections on transmitter. Additional video output(s) on the receiver. Extends KVM audio and serial signals up to 350 meters using standard multi-mode fiber; 1000 meters using eSX+ multi-mode fiber; 40 kilometers using single-mode fiber. USB HID compliant, 4-port hub. Full USB 1.1 compliant, 4-port hub. USB 2.0 compliant (high speed 480 Mbps, 4 port hub). Stereo Emitter BNC connections. DDC2B/EDID complaint. Fully compatible with all of Thinklogical’s VX Router line of products. Full keyboard and mouse emulation through the transmitter. Full duplex stereo audio. Simple plug and play. 3 Extend Distribute Innovate

PS/2 or USB connectors 1 LINE IN MIC OUT SER IAL PORT HID P S 2 LOCAL FROM CPU CAUTION! Replace with same type and rating fuse. CLINK PWR FOL DVI OUT DVI IN L1 L2 100-240V-,0.5A, 50/60 Hz T 2A ,250VAC HOST CTRL DEV USB 1.1 USB HID UPDATES CP STEREO EMITTER INPUT USE ONLY WITH 250V FUSE 100-240V-,0.5A, 50/60 Hz T 2A ,250VAC CAUTION! Replace with same type and rating fuse. USB 2.0 USB 1.1 HOST CTRL USB HID FOL SER IAL PORT MIC IN LINE OUT U P D A T E S P S 2 L1 L2 PWR DVI OUT DDC DVI OUT STEREO EMITTER OUTPUT USE ONLY WITH 250V FUSE STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles and connect the optional local DVI display to the Transmitter’s DVI OUT Port. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-4 Velocitykvm-4 Multi-Mode Fiber Extension System – Single Head, Single Link DVI Multi-Mode Fiber Extension System – Single Head, Single Link DVI 3 1 4 5 5 Local DVI OUT DVI OUT DDC USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► DVI IN STEP 1: Connect your Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown. L1: Data Tx to Rx and Video L2: Data Rx to Tx ◄Audio IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). DVI OUT STEP 4: Connect the DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-4_Manual_QSG Source CPU 4 Extend Distribute Innovate

PS/2 or USB connectors 1 LINE IN MIC OUT SER IAL PORT HID P S 2 LOCAL FROM CPU CAUTION! Replace with same type and rating fuse. CLINK PWR FOL RGB/DVI OUT RGB/DVI IN L1 L2 100-240V-,0.5A, 50/60 Hz T 2A ,250VAC HOST CTRL DEV USB 1.1 USB HID UPDATES CP STEREO EMITTER INPUT USE ONLY WITH 250V FUSE 100-240V-,0.5A, 50/60 Hz T 2A ,250VAC CAUTION! Replace with same type and rating fuse. USB 2.0 USB 1.1 HOST CTRL USB HID FOL SER IAL PORT MIC IN LINE OUT U P D A T E S P S 2 L1 L2 PWR RGB/DVI OUT DDC RGB/DVI OUT STEREO EMITTER OUTPUT USE ONLY WITH 250V FUSE STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles and connect the optional local RGB/DVI display to the Transmitter’s RGB/DVI OUT Port. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-5 Velocitykvm-5 Multi-Mode Fiber Extension System – Single Head, Single Link RGB/DVI Multi-Mode Fiber Extension System – Single Head, Single Link RGB/DVI 3 1 4 5 5 Local RGB/DVI OUT RGB/DVI OUT DDC USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► RGB/DVI IN STEP 1: Connect your Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown. L1: Data Tx to Rx and Video L2: Data Rx to Tx ◄Audio IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). RGB/DVI OUT STEP 4: Connect the RGB/DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination RGB/DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-5_Manual_QSG Source CPU 5 Extend Distribute Innovate

STEP 5: If desired, connect an optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles and connect the optional local dual-link DVI display to the Transmitter’s Dual-link DVI OUT Port. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-8 Velocitykvm-8 Multi-Mode Fiber Extension System – Dual-Link DVI Multi-Mode Fiber Extension System – Dual-Link DVI 3 1 4 Local Dual-Link DVI OUT USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► Dual-Link DVI IN STEP 1: Connect the 3 Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown. Audio ◄IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN *STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). Dual-Link DVI OUT DDC STEP 4: Connect the Dual-link DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination Dual-link DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-8_Manual_QSG Source CPU 5 Fiber-Optic Cables: L1: Data Tx to Rx and Video Primary L2: Data Rx to Tx L3: Video Secondary Dual-Link DVI OUT Local Dual-Link DVI OUT STEP 2: * 6 Extend Distribute Innovate

STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles and connect the optional local DVI displays to the Transmitter’s DVI OUT Ports 1 & 2. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-24 Velocitykvm-24 Multi-Mode Fiber Extension System – DVI Two Display Multi-Mode Fiber Extension System – DVI Two Display 3 1 4 Local DVI OUT 1 DVI OUT 2 DDC USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► DVI IN 1 STEP 1: Connect the 3 Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown. Audio ◄IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN *STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). DVI OUT 1 DDC STEP 4: Connect the DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-24_Manual_QSG Source CPU DVI IN 2 Local DVI OUT 2 5 Fiber-Optic Cables: L1: Data Tx to Rx and Video 1 L2: Data Rx to Tx L3: Video 2 STEP 2: * USB HID or PS2 Keyboard/Mouse 5 7 Extend Distribute Innovate

STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles and connect the optional local DVI displays to the Transmitter’s DVI OUT Ports 1 & 2. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-28 Velocitykvm-28 Multi-Mode Fiber Extension System – Dual- & Single-Link DVI, Two Display Multi-Mode Fiber Extension System – Dual- & Single-Link DVI, Two Display 3 1 4 5 Local Dual-Link DVI OUT 1 DVI OUT 2 USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► Dual-Link DVI IN 1 STEP 1: Connect the four Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown: L1 to L1, L2 to L2, etc. Audio ◄IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN *STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). Dual-Link DVI OUT 1 STEP 4: Connect the DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-28_Manual_QSG Source CPU DVI IN 2 Fiber-Optic Cables: L1: Data Tx to Rx and Video 1 Primary L2: Data Rx to Tx L3: Video 1 Secondary L4: Video 2 STEP 2: * 8 Extend Distribute Innovate

STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM-34 Transmitter’s local devices receptacles. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-34 Velocitykvm-34 Multi-Mode Fiber Extension System – Four DVI Displays Multi-Mode Fiber Extension System – Four DVI Displays 3 4 5 USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► DVI IN 1 STEP 1: Connect the five Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown; L1 to L1, L2 to L2, etc. ◄ Audio IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN *STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). DVI OUT 1 STEP 4: Connect the DVI and KVM cables between the Source CPU and the VelocityKVM-34 Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination DVI and KVM devices to the VelocityKVM-34 Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-34_Manual_QSG Source CPU DVI IN 2 Fiber-Optic Cables: L1: Data Tx to Rx and Video 1 L2: Data Rx to Tx L3: Video 2 L4: Video 3 L5: Video 4 STEP 2: * DVI IN 3 DVI OUT 2 DVI OUT 3 DVI IN 4 1 DVI OUT 4 DVI OUT 1 DVI OUT 2 DVI OUT 3 DVI OUT 4 9 Extend Distribute Innovate

STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles. Ensure all system functions are operating properly. USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-35 Velocitykvm-35 Multi-Mode Fiber Extension System – Three DVI Displays Multi-Mode Fiber Extension System – Three DVI Displays 1 4 5 USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► DVI IN 1 STEP 1: Connect the 4 Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown. Audio ◄IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN *STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). DVI OUT 1 STEP 4: Connect the DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-35_Manual_QSG Source CPU DVI IN 2 Fiber-Optic Cables: L1: Data Tx to Rx and Video 1 L2: Data Rx to Tx L3: Video 2 L4: Video 3 STEP 2: * DVI IN 3 DVI OUT 2 DVI OUT 3 3 10 Extend Distribute Innovate

USB HID or PS2 Keyboard/Mouse USB HID or PS2 Keyboard/Mouse QUICK START GUIDE Velocitykvm-38 Velocitykvm-38 Multi-Mode Fiber Extension System – Two Dual-Link DVI Displays Multi-Mode Fiber Extension System – Two Dual-Link DVI Displays 3 4 5 USB 2.0 Option Audio IN/OUT Stereo 3-D USB 2.0 Option Audio OUT ► STEP 1: Connect the five Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown; L1 to L1, L2 to L2, etc. ◄ Audio IN PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse) Stereo Emitter IN *STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug each into a standard AC supply. Turn both switches ON (1). STEP 4: Connect each of the Dual-Link DVI and KVM cables between the Source CPU and the VelocityKVM-38 Trans- mitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 3: Connect the destination Dual-Link DVI and KVM devices to the VelocityKVM-38 Receiver using standard cables. Ensure the devices are turned ON. 2 VELOCITY-38_Manual_QSG Source CPU DVI IN 1 Dual-Link Fiber-Optic Cables: L1: Data Tx to Rx and Video 1 Primary L2: Data Rx to Tx L3: Video 1 Secondary L4: Video 2 Primary L5: Video 2 Secondary STEP 2: * 1 DVI OUT 1 Dual-Link DVI OUT 2 Dual-Link DVI IN 2 Dual-Link Local Dual-Link DVI OUT 1 (optional) Local Dual-Link DVI OUT 2 (optional) DVI OUT 1 Dual-Link DVI OUT 2 Dual-Link STEP 5: If desired, connect your optional local keyboard & mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM-38 Transmitter’s local devices receptacles and connect the optional local Dual-Link DVI displays to the Transmitter’s Dual-Link DVI OUT Ports 1 & 2. Ensure all system functions are operating properly. 11 Extend Distribute Innovate

Copper Connectors Transmitter Video System 4,5,8 DVI-D (2); System 24,34 DVI-D (4) Audio MIC 3.5mm Jack Audio LINE 3.5mm Jack Serial Port DB9 Female USB 1.0 (HID) USB B USB 1.1 USB B USB 2.0 USB B USB Local Kybd. USB A USB Local Mouse USB A PS2 Keyboard MiniDIN 6 Female PS2 Mouse MiniDIN 6 Female PS2 Local Kybd. MiniDIN 6 Female PS2 Local Mouse MiniDIN 6 Female Stereo Emitter 3D BNC Female Software Updates USB B (3) Fiber Connectors LC, SC or ST for Multi-mode Receiver Video System 4, 5, 8 DVI-D (2); System 24,34 DVI-D (4) Audio MIC 3.5mm Jack Audio LINE 3.5mm Jack Serial Port DB9 Male USB 1.0 (HID) USB A (4) USB 1.1 USB A (4) USB 2.0 USB A (4) PS2 Keyboard MiniDIN 6 Female PS2 Mouse MiniDIN 6 Female Stereo Emitter 3D BNC Female Software Updates USB B Fiber Connectors LC, SC, or ST for Multi-mode Electrical Cables (supplied with system) CBL000009-002MR, DVI-D M to M: -4, -5, -24(2), -28, -34(4), -35 (3) CBL000022-002MR, HD15 to DVI-D: -5 CBL000023-002MR, DVI-D Male to Male, Dual-Link: -8, -28, -38 (2) KIT-000005-R, Audio Kit, 6FT: 1 each -4, -5, -8, -24, -28, -34, -35, -38 AC Power cords (model determined by destination) KIT-000005-R Audio Kit contains the following: CBL000006-006FR 6 pin MiniDIN Male to Male Cable, 6FT (2) CBL000015-006FR USB A-B Cable, 6FT (2) CBL000016-006FR 3.5mm Male to 3.5mm Male Plug, 6FT (2) CBL000017-006FR DB9 Male to DB9 Female Cable, 6FT (1) CBL000018-006FR BNC Male to BNC Male Cable, 50Ω, 6FT (1) Video Resolution DVI –D All Single-Link and Dual-Link Resolutions Optical Cable Fiber Type: 50 or 62.5 micron, Multi-mode Required: 1, 2, 3, 4 or 5 depending upon application. (Not supplied, but available through Thinklogical™) Optical Distance Up to 50 meters with Type OM1 Up to 350 meters with Type OM2 Up to 1000 meters with Type OM3 Operating Temperature and Humidity 0° to 50°C (32° to 122 °F), 5% to 95% RH, non-condensing Dimensions Height: 1.72” (4.4cm) ± .039”; .100cm Depth: 18.02” (45.8cm)* ± .039”; .100cm Width: 17.49” (44.5cm) ± .039”; .100cm Weight Weight: 11 lbs (4.99kg) each Shipping Weight: 27 lbs (12.25 kg) Transmitter and Receiver Supply Voltage 100-240 VAC, 47-63 Hz, Universal AC power supply Power Consumption: 40 Watts per unit Compliance: Approvals for US, Canada, and European Union Warranty: 12 months from date of purchase. Extended warranties available. Copyright © 2011. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners. Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical™ products. 13 Extend Distribute Innovate PHONE: 1-800-291-3211 WEBSITE: www.thinklogical.com EMAIL: [email protected] PHONE: 1-800-291-3211 WEBSITE: www.thinklogical.com EMAIL: [email protected]