TESTO 0600.9430 Instructions For Use
Text of TESTO 0600.9430 Instructions For Use
Sondenrohr nnicht kknicken (�), ssondern nnur bbie-
gen (�). KKeine GGewalt aanwenden!
Technische Daten
Messbereich:
bis 500 °C
Aussendurchmesser Sondenrohr: 10 mm
Sondenrohrlänge:
330 mm
Max. Eintauchtiefe:
280 mm
Minimaler Biegedurchmesser (�): 140 mm
Rauchgassonde reinigen
Das Sondenrohr an der Versch
Bei Rauchgassonden mit Kondensatfalle:
Kondensatfalle entleeren
Eines der beiden Endstücke der Kondensatfalle abzie-
hen und Kondensat ausgießen.
Filter wechseln
Bei sichtbarer Verschmutzung des Ausgangsfilters auf
jeden Fall den Eingangsfilter wechseln.
Filter bei nachlassender Pumpenleistung (hörbar) wech-
seln. In den meisten Fällen ist das Wechseln d
Instructions for use
Probe ppipe ccan bbe bbent (�), but not kinked (�).
Do nnot uuse fforce
Technical data
Measurement range:
Up to 500 °C
Outer diameter of probe pipe:
10 mm
Probe pipe length:
330 mm
Max. immersion depth:
280 mm
Minimum bending diameter (�):
140 mm
Cleaning the flue gas probe
Unscrew probe pipe at the screw connection and remo-
ve p
For flue gas probes with condensate trap:
Emptying the condensate trap
Pull off one of the two end pieces from the condensate
trap and pour out the condensate.
Changing the filter
If dirt is visible on the output filter, the inlet filter should
be removed.
Remove filter if pump power drops (audible). Changing
the inlet filter is sufficient in most cases.
Rem