Satel ACX-220 Manual
Text of the manual
Hardwired zone / output expander
Firmware version 1.00
acx-220_en 08/19
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. +48 58 320 94 00
www.satel.eu
The device should be installed by qualified personnel.
Prior to installation, please read carefully this manual in order to avoid mistakes that can lead
to malfunction or even damage to the equipment.
Disconnect power before making any electrical connections.
Changes, modifications or repairs not authorized by the manufacturer shall void your right
The ACX-220 expander enables hardwired devices (detectors, sirens, etc.) to be used in
a wireless system. The expander is designed for use as part of the ABAX 2 / ABAX two-way
wireless system. This manual applies to the expander with firmware version 1.00, which is
supported by:
ABAX 2:
– ACU-220 / ACU-280 controller,
– ARU-200 repeater.
ABAX:
�
Operating temperature range...............................................................................-10°C...+55°C
Maximum humidity ..........................................................................................................93±3%
Enclosure dimensions........................................................................
- relay output common contact.
NC1...NC4 - relay output normally closed contact.
NO1...NO4 - relay output normally open contact.
4. Installation
Disconnect power before making any electrical connections.
The ACX-220 expander should be installed indoors, in spaces with normal air humidity.
Remember that thick walls, metal partitions, e
