REXROTH SYNAX200 Project Planning Manual

DOK-SYNAX*-SY*-07VRS**-PR01-EN-P SYNAX200 Decentralized System for the Synchronization of Machine Axes ...

SYNAX200 DOK-SYNAX*-SY*-07VRS**-PR01-EN-P SYNAX200 Decentralized System for the Synchronization of Machine Axes Project Planning Manual: Version 07 DOK-SYNAX*-SY*-07VRS**-PR01-EN-P • Sy107E_O.doc • Document Number 120-2200-B311-01/EN This documentation assists • in the selection of units and hardware components and • in the b ...

1-1 1.1 General........................................................................................................................................... 1-1 2 Important Directions for Use 2-1 2.1 Appropriate Use ........................................ ...

Digital inputs and outputs......................................................................................................... 4-9 EMC ......................... ...

7.3 Drive Configurations DIAX03 Based on Basic Configuration BE32............................................... 7-3 7.4 Drive Configuration DIAX03 Based on Basic Configuration BE37 ........ ...

10.3 RS485 Link................................................................................................................................... 10-2 11 Appen ...

DOK-SYNAX*-SY*-07VRS**-PR01-EN-P 1 Determing Drive and System Configurations 1.1 General SYNAX200 systems are built of up to 40 digital intelligent drives of the DIAX03 (DKR), DIAX04 and ECODRIVE03 drive family, a motion control PPC-R, one LWL connection between these components meeting SERCOS interface ...

SYNAX200 DOK-SYNAX*-SY*-07VRS**-PR01-EN-P Barcode 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 H1 S1 S3 S2 Barcode Typenschild 1 2 3 4 5 6 7 8 9 1 2 3 4 1112131415161718 5 6 7 8 1 2 3 4 5 6 7 8 XE2 XE1 L+ L- L1 L2 L3 A1 A2 A3 Read and follow Instructions for Electrical Drives" manual, DOK-GENERL-DRIVE****** ...

DOK-SYNAX*-SY*-07VRS**-PR01-EN-P Fig. 1-3: Rotary motors Fig. 1-4: Linear motors ...

SYNAX200 DOK-SYNAX*-SY*-07VRS**-PR01-EN-P PPC Motion Control The motion control PPC can be adapted to meet numerous application requirements by using various option modules. The motion control itself is mounted on a module carrier. Module carrier can also be fitted with I/O modules. PPCs not fitted wit ...