GRAUPNER Soundswitch 2 Instructions Manual

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 1 Instructions for the Soundswitch 2, V1.30 Order No.: 2386.F, 2386.S Manufacturer’s declaration from Graupner GmbH & Co. KG Content of the manufacturer’s declaration If material defects or manufacturing faults should ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 2 Applicable law This declaration, and the claims, rights and obligations arising from it, are based exclusively on the pertinent German Law, without the norms of international private law, and excluding UN retail law. Im ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 3 Introduction The Sound module SOUNDSWITCH 2 was developed for the RC model construction in order to equip models, with an as realistic as possible, speed-dependent engine sound (e.g. engine sound). To make the backgroun ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 4 Technical Data Supply Voltage (Ub): 5 – 14V DC Power consumption: Standby-current: approx. 30mA Operation (only sound): max. 0,4A Operation (sound + switching outputs): max. 2,5A Switching-inputs: 5 pieces LO-Signal = ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 5 Operating Modes: Digital, analogue and mix mode In order to make the Sound module universal usable, 3 different operating modes are available. The operating mode is very important for the possible functions and especial ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 6 Pin assignments in digital mode Connections on the Sound module: X1/1 Loudspeaker + X1/2 Loudspeaker - X1/3 Ground for additional audio amplifier X1/4 Supply voltage + (5 – 14V DC) X1/5 Supply voltage - X1/6 Input for ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 7 Power supply 5 - 14V DC + - - + Loudspeaker Volume Audio amplifier NF Topspeed 100k Switch module RC-receiver brown red orange yellow green blue purple grey white black brown red orange yellow Multifunction- output 1 Mu ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 8 Pin assignment in analogue mode Connections on the Sound module: X1/1 Loudspeaker + X1/2 Loudspeaker - X1/3 Ground for additional audio amplifier X1/4 Supply voltage + (5 – 14V DC) X1/5 Supply voltage - X1/6 Input for ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 9 Power supply 5 - 14V DC + - M M Motor 1 Motor 2 Speed controller - + Loudspeaker Volume Audio amplifier NF Top speed 100k (option) Switch module brown red orange yellow green blue purple grey white black brown red orang ...

No liability for printing errors. Technical modifications reserved. #??????? 07/2012 10 Pin assignment in mix mode Connections on the Sound module: X1/1 Loudspeaker + X1/2 Loudspeaker - X1/3 Ground for additional audio amplifier X1/4 Supply voltage + (5 – 14V DC) X1/5 Supply voltage - X1/6 Input for eng ...