Gecko in.k1000 Quick Reference Card

Please consult your spa user manual for complete info on the features of your spa system. in.k1000 touch screen keypad No buttons, keys and overlays! Mode and function selection wheels, all-on or all-off one touch activation key of last used settings, interactive display icons and on-screen messages are all elements of the in.k1000 use ...

selection wheel: water care - maintenance - date & time - keypad - electrical config - wifi - about - spa mode spa mode To select the spa mode, slide the left wheel up or down until the spa icon is highlighted in the middle. The home page will be displayed its equipment start or stop keys, up and down buttons, water temperature, message ...

will help you set up your ideal filtration and heating settings. Choose, set or modify one of the 5 suggested modes depending on your needs at any given time. Away from home In this mode the spa will always be in economy; the set point will be ...

date and time keypad settings maintenance To modify maintenance settings, slide the right wheel until the maintenance icon is highlighted in the middle. From the Maintenance page you can access the following: • Error log Simply touch the line of the item you want to change. date and time To modify date and time settings, slide the ...

wifi settings To modify wifi network settings, slide the right wheel until the wifi icon is highlighted in the middle. in.touch module not connected If the in.touch module of your spa system is not connected, this message will be displayed. wifi networks After a few s ...

selection wheel: on/off - speakers - source - bluetooth - mute / last track / play/pause / next track mode selection wheel: audio mode audio mode (only available if the system detects a connected in.stream 2 audio station) To select the audio mode, slide the left wheel up or down until the audio icon menu is highlighted in the middle. In ...

selection wheel: on/off - bromicharge - boost levle - maintenance - statuts and messages mode selection wheel: in.clear icon sanitization mode (only available if the system detects a connected in.clear water sanitization system) To select the sanitization mode, slide the left wheel up or down until the in.clear icon menu is highlighted i ...

be between 3-5 ppm. If the bromine level stays within that range for 3 consecutive days, your maintenance level is well adjusted. modify the boost level Boost mode is activated automatically 5 minutes after starting a pump. Boost mode increases the bromine generation rate to ...

wipe screen This message appears when too much water is detected on the touch screen. Simply wipe away excess water. installation error messages Upon connecting the in.k1000 to your spa system you may see one of two error messages. Please follow the instructions in the message or contact your dealer for more information. Error mes ...