Ambient Lockit Timecode Manual 

Text of the manual

Table of contents

page 1. Introduction 3 2. Package Contents 3 3. Powering 3 4. Unit Description 4 5. Connectors 4 6. Quick Start Guide 7 7. Web Interface 8 System Menu 9 Tabs of the Web interface 11 Timecode 11 ACN Radar 13 Sound Recorder 15 Clip Metadata 18 Lens Metadata 20 8. Me

©2017, Ambient Recording GmbH

2 Slate Menu 29 Display 29 LEDs 29 Sensor 29 ACN Menu 30 Ant 31 SYS Menu 32 Menu 32 Config 32 Display 32 Ant 33 USB / LemoACN 33 Bat 34 IR 34 Reset 34 Info 34 9. LED Blink Codes 34 10. Application Notes 36 11. Physical Specifications 38 12. ACN Radio 38 13. Timecode, Metadata, and Power Supply Cables 39

The ACN-ML MasterLockit combines the state of the art, high-accuracy Lockit timecode technology by

Ambient with advanced metadata administration and sharing over the Lockit Network. It implements a dual-system design through a full-featured ACN Lockit circuitry with adapt

©2017, Ambient Recording GmbH

4 4. Unit Description ① Configuration wheel (↓ push, ↔ toggle left/right) ② Status LEDs (see page 26) ③ OLED display (see page 14 ff) ④ ACN antenna (do not remove, only substitute with original replacement) ⑤ ACN A, blue socket (see page 5) ⑥ TC, red socket (see page 5) ⑦ MasterLockitP

SMPTE 12M Timecode in/out

Lemo series FGG/JGG.0B.305 or compatible pin 1: GND pin 2: TC in pin 3: ACC com pin 4: Reference out, ext DC In 6-18V on ACL204, ACN-TL and ACN-LS pin 5: TC out (SMPTE 12M) ⑤ “Blue” socket, connect blue coded c

©2017, Ambient Recording GmbH

6 ④ SMA type F, leave supplied antenna attached, only substitute with original replacements ANT-2.4-SMA-M(90) ⑫ Primary DC port, connect your external power supply here Hirose HR10-7P-4P or compatible pin 1: GND pin 2: NC pin 3: NC pin 4: 6 -24V DC ⑦ DC through socket, only available on MasterLock

Other Controller Manuals