BML dCam3 Instruction Manual

Text of the manual

- 1 -

Package Contents - BML dCam3 dashcam - Suction holder - Car charger - USB data cable - Instruction manual Product Layout 4 5 6 10 9 3 2 1 8 7 1. Up 2. Menu 3. Down 4. Ok 5. Mode / Lock 6. On / Off 7. Microphone 8. Reset 9. Mini USB port 10. Micro SDHC port Positioning 1) Be careful to ensure the camera does not restrict the driver’s view. 2) Attach

- 2 -

Memory Card The device requires a micro SDHC memory card of up to 32 GB. Only use type 10 and higher. It is necessary to format the memory card before use (go to system settings). Memory cards should be mounted and unmounted while the camera is switched off. Charging - The camera is designed to be permanently connected to the car cigarette lighter via

- 3 -

- The video audio can be muted and unmuted by pressing the Up button and the display can be switched on and off by the button. Gallery Mode - The Up/Down buttons are used to navigate through the individual videos and the OK button starts and stops the recordings. - The Up/Down buttons are used to increase or lower the volume of the recordings, and,

- 4 -

is detected within the camera’s field of vision. When all movement ceases, the re- cording will stop after 10 seconds and be saved. Should you stop any recordings manually, or should the camera switch off, then the motion detector will deactivate. - Date stamp – Recordings are marked with actual times and dates. - Record audio – The microphone

- 5 -

Main Features - Excellent design - Full HD - Loop recording - G-sensor - 1.5“ display - Motion detector Technical Parameters Video Resolution Up to Full HD 1920x1080 (interpolated) Angle of View 120° Video Format AVI Camera Resolution Up to 12 MP Photo Format JPG Display Size 1.5“ Memory Card Micro SDHC up to 32 GB Connectivity Mini USB Specificat

Other Dash Cameras Manuals