Opticon OPN-3102i Quick Start Manual

Text of the manual

OPN-3102i Bluetooth Quick Start Guide

OPN-3102i Function Key Status LED USB Connector (Data/Charging) Feedback Buzzer Scan Key 2D Imager USB Data Enabled Disabled SPP (Serial Port Profile) HID (Most Common) (Human Interface Device) Bluetooth Mode MFi (Made for iDevice) Note: Apple MFi mode requires the OPNTerm application which is available for download fro

• Bluetooth-HID - This connection mode is the most common and is normally supported by host devices

(computers, tablets and smartphones). Bluetooth-HID mode works as if a Bluetooth keyboard were attached to the host device. This means that all data scanned will be as if typed. It is important that there is a blinking cursor ready to accep

Step 1 - Scan Bluetooth-HID(Keyboard)

Step 2 - Turn on Bluetooth and NFC in your mobile device settings Step 3 - NFC Symbol Tap the NFC symbol on the back of the scanner to the NFC symbol on the back of the device (location of the NFC chip) When the connection is initiated, you will hear a chirp and the scanner’s LED will start flashing blue. • If you do

Beeper & Vibrate

USB Data Options • Enabled (Default) - This feature allows the data stored on the OPN- 3102i to be transferred to an attached computer. Data is stored when the Bluetooth connection goes out of range or is otherwise interrupted. Stored data is automatically transmitted to the host device upon reestablishing

Other Barcode Reader Manuals