OHAUS SCOUT Instruction Manual
Text of the manual
MANUAL DE INSTRUCCIONES
Interface RS232
MODE D’EMPLOI
RS232-Schnittstelle
BEDIENUNGSANLEITUNG
Interfaccia RS232
MANUALE D’ISTRUZIONI
RS232 组件
使用说明书
スカウトシリーズ
RS232 インターフェイス
取扱説明書
RS232 인터페이스
사용 설명서
Интерфейс RS232
This Interface Kit is for use with OHAUS Scout STX, SPX, SKX and SJX series
products.
INTERFACE INSTALLATION
Install the Interface module on the mini DIN port (round connector) located at the
rear side of the balance as shown. During this process, please make sure the
balance is powered off.
Notes:
Please make sure the s
For SPX, SKX and SJX Balances:
Upon installation, the balance will show [r.S.2.3.2] during the power sequence.
PRINT
Reset:
no, yes
Stable:
off, on
A.Print:
off
On.Stable
interval
accept
continuous
Content:
Result (-> off, on)
Gross (-> off, on)
Net (-> off, on)
Tare (-> off, on)
Header (-> off, on)
Footer (-> off, on)
Mode (-> off, on)
For STX Balances:
Upon installation, the STX balance will show RS232 icon (
) in the upper right
corner.
Menu added
Function
Communication
|--RS232
|--Baud Rate
|--Transmission
|--Handshake
|--Print Settings
Set the baud rate (bits per second).
Set the data bits, stop bit, and parity.
Set the flow control method.
For more info, please
The RS232 Interface Kit cable terminates with a 9 pin Sub-D female connector.
Active pins: Pin 2 = TXD, Pin 3 = RXD, Pin 5 = Ground.
The Interface connector can connect directly to a computer, an OHAUS printer and
other printers.
RS232 OUTPUT
With the interface installed the balance will operate in several ways according to
th
Output String (Check Weighing Application):
[weight]
11 characters (right justified)
[space]
1 character
[unit]
5 characters (right justified)
[space]
1 character
[stability indicator]
1 character; "?" when unstable, space when stable
[space]
1 character
[T/N/G/PT] 2 characters (right justified)
[space]
1 character
[appl
Scout Pro Print Format 2 (for the models 401/601/6000):
Output String:
[weight]
11 or 12 characters (right justified)
[space]
1 character
[unit]
1~5 characters
[space]
1 character
[stability indicator]
1 character; "?" when unstable, space when stable
[space]
1 character
[Legend]
1~10 characters
Note: The unit field length varies with di
The following interface commands will be acknowledged by the Balance. They are
case sensitive. The balance will return “ES” for invalid commands.
Command
Function
IP
Immediate Print of displayed weight (stable or unstable).
P
Print displayed weight (stable or unstable).
CP
Continuous Print.
SP
Print on Stability.
SLP
Auto