MaxLite WallMax WP-OP Series Operating Instructions Manual
Text of the manual
Operating Instructions WP-OP Series
MaxLite WallMax™ Open Face
• To reduce the risk of death, personal injury or property damage from
fire, electric shock, falling parts, cuts/abrasions, and other hazards
read all warnings and instructions included wi
General Wiring Diagram
CAUTION: Turn off electrical power at
fuse or circuit breaker box before wiring
fixture to the power supply.
Connecting panels to AC source supply:
All units must be individually connected to
the AC supply.
Black = Line
White = Neutral
Green = Ground
Installation & Operation - Junction Box Mounting:
1. Unscrew the screws on the right s
Installation & Operation - Conduit Mounting:
1. Unscrew the screws on the right side using a
suitable screwdriver. Separate the male and
female connectors, then remove the reflector
from the back plate.
2. Unscrew the right-side Bolt(5). Drill three 6.5mm holes in E/F/G
using a suitable drill. Next, fasten the back plate to the wall with
the three screw comp
1. The Red wire (Photocell) connects to Black wire (Driver AC)
2. The White wire (Photocell) connects to White wire (Driver AC) and White N (Main Power)
3. The Black wire (Photocell) connects to Black L (Main Power)
4. Green wire (Driver AC) connects to Green G (Main Power)
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave,
