max mobility SmartDrive MX2+ Operation & User’s Manual

you live inside the U.S. or Canada and your device is still under warranty! To get the most out of your SmartDrive + PushTracker, download the PushTracker App from the Apple or Google Play App Store. Check the App regularly for the latest device firmware updates! User’s Manual 5425 crossings boulevard antioch, tn 37013 usa p: 800.637.2980 f: 888.411.9027 Informational videos available at www.max-mobility.com max mobility, llc ® SmartDrive MX2 SDMX2-DUM Rev. F Wheelchair Power Assist + ...

Spec Sheet Specifi cation Sheet Manufacturer: Max Mobility, LLC Address: 5425 Crossings Blvd. Antioch, TN 37013 USA Phone : (615) 953-5350 / Toll-Free: (800) 637-2980 SDMX2-SPS Rev. ® Range (level / no resistance conditions): 12.3 miles (19.8 km) Maximum speed (level surface): Adjustable [4 mph (6 km/h) default] Maximum speed (6o incline): Adjustable [4 mph (6 km/h) default] Maximum acceleration: Adjustable up to 2.0 ft/s2 (0.6 m/s2) [0.7 ft/s2 (0.2 m/s2) default] Motor power: 250 W Motor voltage: 36 V Operating temperature: -25 oC to 50 oC Continuous theoretical driving range: 14.2 miles (22.9 km) Total weigh ...

Table of Contents 1. Introduction 1 Intended Use of the SmartDrive 1 Must Read Prior-to-Use Information 1 Warnings and Safety Precautions 1 Electromagnetic Interference (EMI) 3 Bluetooth Wireless Communication 3 List of Components 4 2. SmartDrive Set-Up 5 SmartDrive Attachment 5 PushTracker Band 5 Thumb Throttle Buttons 5 3. Operating the SmartDrive 5 Power Assist Ready ...

Intended Use of the SmartDrive The Max Mobility SmartDrive Wheelchair Power Assist device is exclusively intended to provide auxiliary power to manual wheelchairs to reduce the pushing power needed by their users, including pediatrics, with a user weight of 30 to 331 lbs (14 - 150 kgs). It is intended to be used by users capable of operating and maneuvering a powered and manual wheelchair, ultimately empowering them through enhanced mobility. It is also very strongly recommended that it be used on manual wheelchairs that meet the “Wheelchair Compatibility” dimensions listed in the Specification Sheet. Must Read ...

Do not operate over significantly rough terrain, very slick surfaces, extreme slopes, or loose ground. This cables. It is strongly recommended that a seat cushion be used on your wheelchair when using the buttons. The SmartDrive and PushTracker have passed industry climate testing the same as power wheelchairs, and are con- sidered rain / splash proof. Complete submersion of either may cause malfunction or damage and void the warranty. Take the PushTracker off prior to bathing or showering. Surface temperatures of the SmartDrive can increase and become hot to the touch when exposed to external sources of heat, such as sunlight ...

Electromagnetic Interference (EMI) Electromagnetic Interference comes from radio wave sources. Examples of these sources are radio / TV station transmit- ters, receivers, transceivers [send and receive signals], cell phones, walkie-talkies, etc. There are many sources of EMI in one’s daily environment, some that are avoidable and some that one might not even realize. Powered electronic devices, such as the SmartDrive are susceptible to EMI, both strong and weak, from these types of transmitters, as well as from electrostatic discharges (ESD) and conducted sources. These interferences can cause unintentional activ ...

1. Thumb Throttle Buttons [sold separately as optional accessory] 2. Attachment Hardware 3. SmartDrive / Drive Unit 4. Rollers 5. SmartDrive Handle 6. SmartDrive LEDs 7. SmartDrive Toggle Switch 8. SmartDrive Charger Cover 9. Charger / Button Receptacle 10. Omni-Drive Wheel 11. Charger / Button Connector 12. Button LED 13. Button Velcro Loop 14. PushTracker List of Components ...

2. SmartDrive Set-Up SmartDrive Attachment The SmartDrive is designed to easily and quickly attach to all types of manual wheelchairs, both rigid and folding. Refer to the Specification Sheet to verify the compatibility of the wheelchair. Custom SmartDrive attachment solutions are also avail- able if the existing hardware does not work for the desired wheelchair. Use the separate directions provided with your attachment hardware for correct set-up prior to use. Adjustments made to the wheelchair set-up could affect the orientation of the SmartDrive. Adjust or replace the attachment hardware, if needed, whenever ...

The power assist can ALWAYS be deactivated by turning power assist OFF / wirelessly disconnecting it from the SmartDrive. If you have thumb throttle buttons, pressing and releasing either button will also deactivate the motor if driving. Serious care should always be taken on hills, inclines, ramps, in crowded / confined areas, etc. Tapping force does not need to be excessive or “hard”. Gentle, stiff wrist taps at a reasonable speed (i.e. one half (0.5) second between taps) is sufficient. While the PushTracker is designed to sense the tap / impact of your PushTracker wearing hand, other movements done with your hands whil ...

MX2+ Control Mode MX2+ is the default control mode for power assist [see “SmartDrive Settings” in the separate PushTracker User’s Manual provided for details on changing modes]. This amazing operation allows you to push around as much as you want, and then quickly and easily get the power that you need for all situations. Operation of this mode is ideal for weaker pushers as it allows for motor activation at the tap of the wrist. Additionally, this and all control modes can also always be used with the thumb throttle buttons. To activate power assist to drive in this mode, with the power assist ON and wireles ...

Anti-Rollback The SmartDrive is equipped to provide rollback resistance whenever power assist is activated while the wheelchair is moving backwards. This is a safety feature that requires the wheelchair to be at rest to begin driving. Whenever the rollback resistance is not activated, the SmartDrive will roll backwards freely. As warned before, serious care should be taken on all hills, inclines, ramps, etc. The rollback resistance may not be able to prevent the quick rolling back on especially steep slopes and / or for very heavy wheelchair users. Anti-rollback is not a parking brake. Be sure to secure your wheelchair with ...

Long-term storage of the batteries [more than 3 months] reduces its capacity through spontaneous discharge. Charge the battery to at least 75% before you store it long-term, and avoid storing the SmartDrive where the temperature is too high or with high humidity. 4. Batteries Although the battery in the SmartDrive is very small and compact, it can store a large amount of power. Faulty handling or storage can damage the equipment, and in some cases result in shocking, burns, or fire. Battery Information The SmartDrive houses the rechargeable Lithium Iron Phosphate battery used to power the motor. The best in Lithi ...

Traveling and Shipping Because the SmartDrive houses a Lithium-Ion battery, special considerations have to be taken when traveling on an airplane. The SmartDrive must be carried onto your plane and should be stored in the overhead bin. It is recommended that advanced arrangements be made with each airline operator and approval received prior to departure date. A “SmartDrive Airline Pas- senger / IATA Certificate” can be downloaded from the Max Mobility website [www.max-mobility] or provided upon request. Use the provided foam stand for the SmartDrive to prevent movement and damage when transporting in a car. If riding in ...

Other Maintenance Contact Max Mobility or your mobility equipment dealer for any other maintenance or replacement that the device might need. Download and connect to the App regularly to ensure your device is running the latest firmware, as features are added and improvements are made. Troubleshooting It is strongly recommended to update the firmware on your device to the latest version via the App prior to any troubleshoot- ing as your issue may have been resolved in later firmware releases. Safeguards are designed into the SmartDrive and PushTracker for your safety and to prevent damage to the circuit board and ...

It is important for your safety and the safety of those around you that you are properly trained to use the SmartDrive. Please take this training seriously and be sure to fill-in all information. If you do not understand something, just ask. SmartDrives are shipped in MX2+ control mode with moderate Maximum Speed and Acceleration settings which allow for familiarity and PushTracker deactivation practice prior to extensive use. Download the PushTracker smartphone App in the Apple or Google Play App Store to quickly change SmartDrive setting ...

MAX Mobility voor onderhoud als u in de Verenigde Staten of Canada woont en uw apparaat nog steeds onder de garantie valt! max mobility, ® llc 5425 crossings boulevard antioch, tn 37013 usa p: 800.637.2980 f: 888.411.9027 Informatie video’s beschikbaar zie www.max-mobility.com Om optimaal gebruik te maken van uw SmartDrive + PushTracker, download de PushTracker App van de Apple App store of Google Play store. Controleer de app regelmatig op de nieuwste firmware-updates! SmartDrive MX2+ Power Assist voor rolstoelen Gebruikershandleiding Nederlands ...

Addres: 5425 Crossings Blvd. Antioch, TN 37013 USA Telefoon : (615) 953-5350 / Toll-Free: (800) 637-2980 SmartDrive Gebruikershandleiding I ® www.max-mobility.com SmartDrive Model: MX2+ Totale lengte: 389 mm Totale Breedte: 141 mm Totale hoogte: 242 mm Omni-wiel diameter: 193 mm Omni-wiel breedte: 71 mm Gewicht: 5,7 kg Bevat batterij type: Lithium Ion (Lithium Iron Phosphate) Nominale bedrijfsspanning: 36 V Elektrische lading: 3,4 Ah Firmware versie(s): Download / maak verbinding met App Zie de PushTracker Gebruikershandleiding voor de specifi caties ervan. Rolstoel Compatibiliteit Rolstoel frame t ...

Inhoudsopgave 1. Introductie 1 Beoogd gebruik van de SmartDrive 1 Lees deze informatie voor gebruik 1 Waarschuwingen en veiligheidsmaatregelen 1 Elektromagnetische interferentie (EMI) 3 Bluetooth Draadloze Communicatie 3 Lijst van onderdelen 4 2. SmartDrive installatie 5 Bevestiging SmartDrive 5 PushTracker Band 5 Bedieningsknoppen 5 3. Bediening SmartDrive 5 Ondersteuning klaar voor gebruik 5 EZ-ON Ondersteuning klaar voor gebruik 6 Ondersteuning deactiveren 6 MX2+ Modus 7 MX2 Modus 7 MX1 Modus 8 Terugrol weerstand 8 Gebruiksomstandigheden 8 4. Batterij 9 Batterij informatie 9 SmartDrive batterij opladen 10 Reizen en ve ...