JSI Moto Installation Instructions
Text of the manual
Page 1 of 3
Moto
Step 2
Locate Bolt Slots on Inside of Chair
• Carefully lay unit over on it’s side.
• Pull open bottom cover flap and locate the upper and lower
slots on inside back cavity.
Rear Shelf
Lower
Slots
Upper
Slots
Step 1
Insert Washers onto Hand-Knob Bolts
• Insert (1) one lock wash
Page 2 of 3
Moto
Step 3
Insert Knob Bolts from Inside of Chair
• Insert all four knob bolts into slots as shown:
Push lower bolts entirely through back of chair.
Insert upper bolts into wood slat, do not
push through entire back of chair.
Rear Shelf
(continued)
Lower
Bolts
Upper
Bolts
Step 4a
Attach Rear Shelf to
Page 3 of 3
Moto
Rear Shelf
(continued)
Step 4b
Attach Rear Shelf to Upper Knob Bolts
• Insert upper knob bolts into corresponding inserts on
rear shelf and thread loosely.
• Once all four bolts have been aligned and inserted,
tighten all four bolts firmly.
Align upper bolts
with inserts and
begin to thread.
Ste