JEM TECHNO-HAZE Operation & User’s Manual

BELVOIR WAY, FAIRFIELD INDUSTRIAL ESTATE, LOUTH, LINCOLNSHIRE. LN11 0LQ. TEL:(01507) 604399 FAX:(01507) 601956 MARTIN MANUFACTURING (UK) PLC USER GUIDE VERSION 1.4 Techno-Haze TechnoHaze performance ‘Performance’ www.audiovias.com ...

TECHNO-HAZE USER GUIDE Pro-Haze Fluids suitable for this machine: Note: The JEM warranty will be void if any fluid other then JEM approved fluid is used. If other fluids are used there could be serious damage to the machine and the fluid may not of been tested for use in public areas. TECHNO-HAZE USER GUIDE How To Contact Us Address: Telephone: Fax: Email: [email protected] Website: Http://www.jemsmoke.com/ PAGE 9 MARTIN MANUFACTURING (UK) PLC Martin Manufacturing (uk) Plc Belvoir Way, Fairfield Industrial Estate, Louth, Lincolnshire. LN11 0LQ. +44 (0) 1507 604399 +44 (0) 1507 601956 www.audiovias.com ...

Trouble Shooting CAUSE CURE SYMPTOM The mains switch does not light when I switch on. Main fuse blown.. No power connected. Check main fuse. Check power is connected. The power LED does not light on the remote control. Fuse on main PCB blown. Remote control not connected. Check fuse on Main PCB. Check connection of remote control. The ready LED does not light. even after 15 minutes. Thermocouple fault Thermal trip fault Contact your Distributor. No haze output. Low fluid level. No fluid in container. Check fluid level LED. Replenish fluid container. MARTIN MANUFACTURING (UK) PLC • • • • • • • • User Guide I ...

Introduction The TECHNO-HAZE has been designed to produce a perfect translucent environment for today’s intelligent lighting effects. Furthermore, this unique design is guaranteed to give the user maximum reliability thanks to features such as the “Low fluid cut off system”,which protects the pump in the event of machine running out of fluid. Creating the perfect ambient haze relies heavily on the correct particle size and dispersion. The TECHNO-HAZE produces this by vapourising the special working fluid at very precise temperature in a high mass heater block which contains a cuperous helicoil of 3 metres length. The produc ...

PAGE 6 Using The Remote Control The Technohaze comes with a compact remote allowing the user to prime the pump and control the output level. MARTIN MANUFACTURING (UK) PLC 1 2 3 4 5 6 7 8 9 OUTPUT PRIME ON OUTPUT CONTROL POWER LED PRIME BUTTON TECHNO HAZE USER GUIDE Safety • • • • • • • Always use a JEM approved fluid, other fluids could be dangerous and could cause damage to the machine. Always check the voltage is correct for use with the machine, the voltage setting is printed on the serial label. Always read the user guide before operating the machine, smoke machines need to be operated carefully to avoid risk. D ...

Machine Layout PAGE 4 MARTIN MANUFACTURING (UK) PLC FLUID OUT LED READY LED HEAT LED FLUID COMPARTMENT FAN REMOTE CONNECTION MAINS SWITCH POWER LEAD TOP VIEW REAR VIEW PAGE 5 TECHNO HAZE USER GUIDE Getting Started • • • Once you have selected the best position for the TECHNO- HAZE you can begin to use the machine. First check the power supply you have is correct for the machine .If it is, you can connect to the power supply and switch the mains switch on at the rear of the machine; the machine will start to heat up and the fan will run. It will take approximately 10 minutes for the machine to reach working temperature. Whil ...