Fluke DTX-PLA002PRP Installation Instructions

© 2006 Fluke Corporation. All rights reserved. Printed in USA. All product names are trademarks of their respective companies. DTX-PLA002PRP Replacement Parts for DTX-PLA002 Permanent Link Adapters Installation Instructions The DTX-PLA002PRP is a set of contact tips and latches that replace worn tips and latches on DTX-PLA002 ...

1 Remove the DTX-PLA002 adapter from the DTX tester. 2 Use a Phillips screwdriver to loosen the screw on the connector case; then remove and replace the tip or latch as shown below. 3 Verify that the conductive washer is on the case screw as shown below. 4 Reassemble the connector case, noting the orientation of the beveled edge on ...

• Australia: 61 (2) 8850-3333 or 61 (3) 9329-0244 • Beijing: 86 (10) 6512-3435 • Brazil: 11 3044 1277 • Canada: 1-800-363-5853 • Europe: +44-(0)1923-281-300 • Hong Kong: 852 2721-3228 • Japan: 03-3434-0510 • Korea: 82 2 539-6311 • Singapore: 65 6799-5566 • Taiwan: (886) 2-227-83199 • USA: 1-800-283-5853 • Any ...

See the DTX Series CableAnalyzer Technical Reference Handbook and the DTX-PLA002 Instruction Sheet for additional specifications. LIMITED WARRANTY AND LIMITATION OF LIABILITY Fluke Networks mainframe products will be free from defects in material and workmanship for 1 year from the date of purchas ...