Dataq DI-700 Operation & User’s Manual

Text of the manual

Artisan Technology Group is your source for quality

new and certified-used/pre-owned equipment • FAST SHIPPING AND DELIVERY • TENS OF THOUSANDS OF IN-STOCK ITEMS • EQUIPMENT DEMOS • HUNDREDS OF MANUFACTURERS SUPPORTED • LEASING/MONTHLY RENTALS • ITAR CERTIFIED SECURE ASSET SOLUTIONS SERVICE CENTER REPAIRS Experienced engineers and technicians on

The way PC-based instrumentation should be

DI-700 Software-Configurable USB Recording Instrument User's Manual Manual Revision E Software Release Level 1 Copyright © 2004 by DATAQ Instruments, Inc. The Information contained herein is the exclusive property of DATAQ Instruments, Inc., except as otherwise indicated and shall not be reproduced, transmitted, tr

Warranty and Service Policy

Product Warranty DATAQ Instruments, Inc. warrants that this hardware will be free from defects in materials and workmanship under normal use and service for a period of one year from the date of shipment. DATAQ Instruments' obligations under this warranty shall not arise until the defective material is shipped freight prepaid to D

DI–700 Series User Manual

Table of Contents v Table of Contents Warranty and Service Policy ................................................................................................................ iii 1. Introduction .....................................................................................................................................

DI–700 Series User Manual

Introduction 1 1. Introduction Congratulations on your purchase of the DI-700 data acquisition instrument. It permits data acquisition through the USB port on IBM personal computers and compatibles running Windows 98 Operating System or higher. This manual describes how to connect and use the DI-700. It does not describe any softw

DI–700 Series User Manual

Specifications 3 2. Specifications. Signal Connections Signal connections are made directly to the 37-pin, D-type connector on the front panel of the instrument. Signal connections can also be made with the DI-705, which is an optional, screw terminal signal interface that plugs into the 37-pin connector and allows you to connect

Other Measuring Instruments Manuals