Pessotto Aladino Series Assembling Instructions
Text of Pessotto Aladino Series Assembling Instructions
“ALADINO” 1420 x 2000 mm
“ALADINO” 1620 x 2000 mm
“ALADINO” 1820 x 2000 mm
Assembling instructions
Mod. Aladino
Double hide-away bed system
Mechanism “Standard”
EN
1. General description .............................................23
Use .........................................................................23
Product description .............................................23
guarantee .............................................................23
2. Safety ....................................................................24
Safety stan
The manual vertical hideaway bed system allows to bring the bedspring from its verti-
cal position inside the cabinet in a horizontal position, to be used as a bed, in a absolu-
tely quick and easy way, with very low efforts.
Before using the hideaway bed, the user must be sure of its good condition and the
good condition of its accessories.
Before using the hideaway bed, the user must make sure that on the sleeping surface
Remarks: No liability is assumed by PESSOTTO RETI in failure to comply with the
given advices.
2 . Safety
Safety standard
Compliance with the safety standards puts the user in terms of working productively,
without danger of harm to himself and to others.
It’s forbidden to use the product without any mattress on the bedspring
surface.
It’s forbidden to use the bed for a different use, than the one described
previously in section USE
In some areas of the product there are some residual risks that couldn’t be avoided in
designing.
Each user has to be aware of the residual risks of this product in order to avoid
possible accidents.
These dangers are listed below:
1) HAZARDS OF CRUSHING
While moving the bedspring there are residual risks of crushing
hands between the moving parts of the mechanism and the
fixed structure of the bed.
2) MAKE SURE that the area of
The vertical manual hideaway bedsystem has been developed by keeping in mind to
have an extra bed, according to the needs, in a absolutely quick way, avoiding all unju-
stified efforts of the user.
MANUAL MECHNANISM
The manual hideaway bed’s movement happens by means of two gas springs put on
the sides of the structure, and recline the bedspring and by other two gas springs whi-
ch recline the upper panel, that becomes the bed’s footboard. (pag
Screws not provided
Remarks:
The combination screws, dowel
wall must be over
200 Newton traction on
each single screw/fxing point.
Check with the supplier on what
kind of dowels are to be used.
X2
MUST BE
Step 02