Ossur Resolve Technical Manual

7 DE | Gebrauchsanweisung 12 FR | Notice d’utilisation 18 ES | Instrucciones para el uso 24 IT | Istruzioni per l’uso 30 NO | Bruksanvisning 36 DA | Brugsanvisning 41 SV | Bruksanvisning 46 EL | Οδηγίες Χρήσης 51 FI | Käyttöohjeet 57 NL | Gebruiksaanwijzing 63 PT | Instruções de Utilização 69 JA | 取扱説� ...

Posterior Vest Size 60-121 cm (24–48 in)* ReSolve® Halo Vest - Short 66-137 cm (27–54 in)** ReSolve® Halo Vest - Tall * Waist stabilizers require trimming if measurement is less than 89 cm (35 in) ** Waist stabilizers require trimming if measurement is less than 86 cm (34 in) Anterior Vest Height Adjus ...

on is left to the physician. Caution: Federal law restricts this device to sale by, or on the order of, a physician. A complete ReSolve® Halo system includes a ReSolve® Halo Vest used in combination with a ReSolve® Halo Ring or � ...

upper edge (center) should be below the sternal notch and centered on the chest. Re-adjust anterior vest height if necessary always remembering to secure the height with threaded knob. Remove anterior vest and set aside. VEST APPLICATION POSTERIO ...

tighten the posterior vest-upright connectors at the attachment points. If necessary, re-tighten shoulder straps, waist stabilizers, and/or waist straps to obtain firm support of vest against sternum. PROPER SUPERSTRUCTURE FIT (Figure 21) A. Tran ...

Any shape modification to the vest frame should only be done after heating the plastic as follows: Heat the plastic with a heat gun on both sides of the frame in the desired region evenly until a surface temperature between 125–200 °F (approximately 52–93 °C) is reached. The heated region of plastic can then be contoured a ...