Panasonic VL-FKD2 Getting Started

Table of Contents Introduction 2 Accessory information 3 For your safety 4 Important safety instructions 5 For best performance 5 Other important information 6 Controls 7 Installation/Registering the repeater to the main monitor 8 Wall mounting 9 Troubleshooting 10 Cleaning 10 Specifications 10 General information 11 Thank you for purchasing a Panasonic product. Please read this manual before using the pro ...

Systems. – VL-SWD501/VL-SWD501U (Main monitor station: VL-MWD501) – VL-SWD272 (Main monitor station: VL-MWD272) (The corresponding models are subject to change without notice.) R By installing this product, you can extend the range of your Video Intercom System to include areas where reception was previously not available. The product exte ...

VL-WD812*2 Wireless sensor camera Camera *1 The product label reads as follows: VL-FKD2EX or VL-FKD2CX *2 The product label reads as follows: VL-WD812EX Signal range and repeater installation example n Using each repeater connected separately This extends signals away from the main monitor. Because signals are sent through the main monitor, different types of devices can be connected to each repeater. (For example ...

To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Preventing fire and electric shock R Use only the power source marked on the product. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. R Use only the specified AC adaptor. R Do not attempt to disassemble or modify this ...

Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. R Do not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction, resulting in an accident. R Consult the manufacturer of any personal medical devices, such as pacemakers or ...

generating devices, such as fluorescent lamps and motors. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the tem ...

repeater can send signals. Flashing green Signals are being sent. Lit orange Signals are not being sent. ID indicator Flashing green Currently registering to the main monitor. Off Not registered to the main monitor. Lit green Strong Indicates the signal l ...

1 Repeater: Connect the AC adaptor, and plug the AC adaptor into a power outlet. R Use only the supplied Panasonic AC adaptor (® page 3). R When the repeater is turned on, the indicator lights in orange. A B C *1 A PROGRAM B Hook C 220-240 V AC, 50/60 Hz *1 Press plug firmly. 2 Main monitor: Perform the registration operations for the repeater. (® Operating Instructions of the Video Intercom Syst ...

1 Place the reference for wall mounting on the wall to mark the 2 screw positions. 2 Install the 2 screws (locally procured) into the wall. R Make sure that the screw heads are at the same distance from the wall. R Install the screws perpendicular to the wall. 3 Hook the repeater on the screw heads. Reference for wall mounting Print the following guide and use it ...

R When the indicators do not light, the AC adaptor is not connected properly. Check the connections. R When the indicators do not light green, move the repeater closer to the main monitor. R When the ID indicator does not light, the registration with main monitor has not completed successfully. Re-register the repeater again. The transmission condition (for images and sound) of the sub moni ...

Relative humidity (non-condensing): up to 90 % Frequency range 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monitor) Note: R Design and specifications are subject to change without notice. R Names, company names, product names, software names, and logos mentioned in this manual are trademarks or registered trademarks of the companies concerned ...