Inter-m RM-6800 Operation Manual

Text of Inter-m RM-6800 Operation Manual

SySteM ReMote MIc StAtIon

Welcome Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right. Welco
SySteM ReMote MIc StAtIon 1 RM-6800 Contents Contents Unpacking .......................................................................................................................................2 Installation environment....................................................................................................................................2 Important Safety Instructions........................................................................
SySteM ReMote MIc StAtIon 2 RM-6800 Installation Unpacking Unpacking Although your RM-6800 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicin
SySteM ReMote MIc StAtIon 3 RM-6800 Features Contents and Accessories Contents and Accessories 1. DC Adapter x 1EA 2. Gooseneck Microphone x 1EA 3. 8P Terminal Block x 2EA 4. 3P Terminal Block x 1EA 5. User Manual x 1EA Features - SYSTEM MODE SETTINGS you can set the operation mode (RM-6042, nRM-8000A, RM-6016 MoDe) of RM-6800. you can use the nPX-SySteM 6000 System by using this function. - GOOSENECK MICROPHONE you can use the gooseneck microphone to broa
SySteM ReMote MIc StAtIon 4 RM-6800 Front Panel Front Panel 1. MIC INPUT TERMINAL this is the terminal to connect the gooseneck microphone. 2. OLED DISPLAY the organic light-emitting diode (oLeD) displays the current status and settings of the device. 3. PRESET CALL SPEED BUTTON this button is used to load the preset saved by user. 4. 0~9 / * / # BUTTON you can use the buttons to select the number of broadcasting areas or various modes. 5. TALK BUTTON Pres
SySteM ReMote MIc StAtIon 5 RM-6800 2) cHIMe: this button is used to operate cHIMe manually. Refer to the 4. chime Set on page 16 of this manual for detail information about the cHIMe settings. 3) ALL: this button is used to select all the broadcasting areas. 7. LED INDICATOR you can check the output level through the level meter. 8. POWER AND COMMUNICATION LED INDICATOR It is the LeD that shows the power status and communication status. the power LeD is l
SySteM ReMote MIc StAtIon 6 RM-6800 Rear Panel Rear Panel 1. DC 24V INPUT TERMINAL this is a Dc 24 V power supply terminal. you can input power by using the adaptor. ※ When nPX-8000 is connected to the coM1 terminal, a Dc40V power is supplied to the coM1 terminal. (However, when using this device in nRM-8000A MoDe at a distance of 300 m or more, connect the adaptor.) 2. COM1 TERMINAL coM1 – When using in nRM-8000A mode, this terminal is used to connect
SySteM ReMote MIc StAtIon 7 RM-6800 ※ communication cable Standards ※ When connecting the system, be sure to use a direct cable. ※ It is recommended that you use a DcR100 m/9.8 Ω or less cable. 4. AUDIO OUTPUT TERMINAL this is an AUDIo output terminal. When using in RM-6016 mode, connect to the ReMote InPUt terminal in eMeRGency PAneL (eP-6216). 5. CONTACT CLOSURE OUTPUT TERMINAL When using in RM-6016 mode, this is used as
SySteM ReMote MIc StAtIon 8 RM-6800 How To Set Up The Device And Precautions How To Set Up The Device And Precautions 1. BOOT SCREEN: AFTER THE POWER IS SUPPLIED, AN APPROPRIATE DESCRIPTION IS DISPLAYED ON THE BOOT SCREEN. - INITIAL SCREEN 1) When power is supplied, the "Booting ... " message will be displayed on the screen after several seconds. 2) If Factory Reset or the model name you want to use is not designated, the RM Model Set screen is displayed.
SySteM ReMote MIc StAtIon 9 RM-6800 10) * When selecting a key, ID is incremented by 1 and selected with # key. 11) It is not displayed at the next boot after being set. 12) When completing setting the RM model and RM ID, the initial Booting Progress screen is displayed as shown below. - LINK ERROR SCREEN 1) If not connected to the main system correctly, the LInK eRRoR screen will be displayed. 2) If you selected the RM-6016 model, the LInK eRRoR screen wi
SySteM ReMote MIc StAtIon 10 RM-6800 [ecS-6216P] [PX-6216 or nPX-8000A] 4) If there is no input for 30 seconds on the standby screen, it switches to the sleep screen. 5) If you select any key on the front panel in sleep status, it will switch to the standby screen. 2. BROADCASTING FUNCTION: THIS FUNCTION ALLOWS YOU TO SELECT THE AREA TO BROADCAST. - NUMBER INPUT SCREEN 1) When you select any number key on the standby screen, it switches to the number input
SySteM ReMote MIc StAtIon 11 RM-6800 8) If you want to cancel after adding a number to broadcast, re-enter the same number to remove it (Remove). 9) When inputting a number to broadcast on the input screen, you can broadcast by selecting this is the talk key. - TALK SCREEN 1) you can modify the MIc Mute on/off settings by using the * key. 2) you can modify the AUX Mute on/off settings by using the # key. 3) you cannot set Mute as on for both MIc and AUX at
SySteM ReMote MIc StAtIon 12 RM-6800 3. PRESET CALL SPEED KEY: PRESET CALL OR INPUT SHORTCUT KEY FUNCTION 1) the 1 ~ 5 key on the front left side of RM-6800. 2) When nRM-8000A is used, the preset of the corresponding number is loaded and displayed. 3) the following screen is displayed when selecting key 1 of left 1 ~ 5 keys. 4) In the mode using RM-6016 or RM-6024, the corresponding number is input. 5) the following screen is displayed when selecting key 1
SySteM ReMote MIc StAtIon 13 RM-6800 2) If you select the MenU button on the MenU Key HeLP screen, you can go to the chime Set screen. 3) Press the number button 1 to select Auto mode. ※ In Auto mode, chime is automatically output when you press the talk button to start broadcasting. 4) Press the number button 2 to select Manual mode. ※ In Manual mode, chime is output when you press the chime button. 5) If you select the MenU button on the chime Set sc
SySteM ReMote MIc StAtIon 14 RM-6800 1) Press the number button 1 to select toggle. ※ If set to toggle, press the talk button once to enable RM broadcasting. Press the talk button once again to end the broadcasting. 2) Press the number button 2 to select Push to talk. ※ If set to Push to talk, the RM broadcast is output only while you press and hold the talk button after selecting Zone. If the talk button is off, the broadcasting is ended. 3) Press the

Inter-m Microphone system Owners Instructions: